The Most In-Demand Cisco 300-710 Pass Guaranteed Quiz
New Version 300-710 Certificate & Helpful Exam Dumps is Online
Securing Networks with Cisco Firepower (300-710 SNCF) Certification Path
Securing Networks with Cisco Firepower (300-710 SNCF) exam is affiliated with the CCNP Security and Cisco Accredited Specialist-Network Security Firepower certifications. This is the official prerequisite for this exam. However these courses, Cisco Firepower Securing Networks, and Cisco Firepower Next-Generation Intrusion Prevention System Securing Network, help candidates prepare for this test.
Knowledge of these domains is an unofficial prerequisite:
- Routing protocols
- Firewall, VPN, and Intrusion Prevention System (IPS)
- Intrusion Detection Systems (IDS) and IPS
- TCP/IP
How to Prepare For Securing Networks with Cisco Firepower (300-710 SNCF) Exam
Preparation Guide for Securing Networks with Cisco Firepower (300-710 SNCF) Exam
Introduction
Cisco Systems , Inc., located in San Jose , California, in the heart of Silicon Valley, is an American multinational technology corporation. Cisco designs , produces and sells hardware , software, telecommunications equipment and other high-tech services and products for networking. Cisco specialises in unique tech markets, such as the Internet of Things (IoT), domain security and energy management, through its various acquired subsidiaries, such as OpenDNS, Webex, Jabber and Jasper.
A world of opportunity is being created by Cisco technology. With Cisco's Training and Certifications, one can power their career with a new learning portfolio that opens opportunities for developers as well as network engineers. A direct path to your technology career ambitions is provided by Cisco's training and certification program. IT technologies are driving the transformation of Cisco's training and qualification programs to prepare teachers, engineers, and developers of software for success in the most important positions in the industry.
Explore the power of the dynamic culture of the Cisco Learning Network to jump-start your certification and lifelong learning goals. Get useful tools for IT training for all Cisco certifications. Access research tools for IT certification, CCNA practise exams, IT wages and finding IT work.
This exam guide is intended to help you determine if you are able to complete the Securing Networks with Cisco Firepower (300-710 SNCF) exam successfully. This guide includes information on the certification test target audience, recommended preparation and documentation, and a full list of exam targets, all with the intention of helping you obtain a passing grade. In order to increase your chances of passing the test, Salesforce strongly recommends a mix of on-the-job experience, course attendance, and self-study.
NEW QUESTION 85
Which feature within the Cisco FMC web interface allows for detecting, analyzing and blocking malware in network traffic?
- A. Cisco AMP for Endpoints
- B. file policies
- C. Cisco AMP for Networks
- D. intrusion and file events
Answer: C
NEW QUESTION 86
An organization has seen a lot of traffic congestion on their links going out to the internet There is a Cisco Firepower device that processes all of the traffic going to the internet prior to leaving the enterprise. How is the congestion alleviated so that legitimate business traffic reaches the destination?
- A. Create a VPN policy so that direct tunnels are established to the business applications
- B. Create a flexconfig policy to use WCCP for application aware bandwidth limiting
- C. Create a NAT policy so that the Cisco Firepower device does not have to translate as many addresses
- D. Create a QoS policy rate-limiting high bandwidth applications
Answer: D
NEW QUESTION 87
What is an advantage of adding multiple inline interface pairs to the same inline interface set when deploying an asynchronous routing configuration?
- A. The interfaces are automatically configured as a media-independent interface crossover.
- B. Allows the IPS to identify inbound and outbound traffic as part of the same traffic flow.
- C. The interfaces disable autonegotiation and interface speed is hard coded set to 1000 Mbps.
- D. Allows traffic inspection to continue without interruption during the Snort process restart.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guide-v601/fpmc-config-guide-v60_chapter_01011010.pdf
NEW QUESTION 88
What is the maximum SHA level of filtering that Threat Intelligence Director supports?
- A. SHA-4096
- B. SHA-512
- C. SHA-256
- D. SHA-1024
Answer: C
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config- guide-v623/cisco_threat_intelligence_director__tid_.html
NEW QUESTION 89
An administrator is attempting to add a new FTD device to their FMC behind a NAT device with a NAT ID of NAT001 and a password of Cisco0420l06525. The private IP address of the FMC server is 192.168.45.45. which is being translated to the public IP address of 209.165.200.225/27. Which command set must be used in order to accomplish this task?
- A. configure manager add 209.165.200.225 <reg_key> <nat_id>
- B. configure manager add 209.165.200.225 255.255.255.224 <reg_key> <nat_id>
- C. configure manager add 209.165.200.225/27 <reg_key> <nat_id>
- D. configure manager add 192.168.45,45 <reg_key> <nat_id>
Answer: A
NEW QUESTION 90
What is a behavior of a Cisco FMC database purge?
- A. User login and history data are removed from the database if the User Activity check box is selected.
- B. The appropriate process is restarted.
- C. Data can be recovered from the device.
- D. The specified data is removed from Cisco FMC and kept for two weeks.
Answer: B
NEW QUESTION 91
Which two deployment types support high availability? (Choose two.)
- A. clustered
- B. routed
- C. intra-chassis multi-instance
- D. virtual appliance in public cloud
- E. transparent
Answer: B,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION 92
An engineer must configure high availability for the Cisco Firepower devices. The current network topology does not allow for two devices to pass traffic concurrently. How must the devices be implemented in this environment?
- A. in a cluster span EtherChannel
- B. in cluster interface mode
- C. in active/active mode
- D. in active/passive mode
Answer: D
NEW QUESTION 93
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
- A. The units must be the same model.
- B. The units must be configured only for firewall routed mode.
- C. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
- D. The units must be the same version
- E. The units must be different models if they are part of the same series.
Answer: A,D
NEW QUESTION 94
A network administrator is concerned about (he high number of malware files affecting users' machines. What must be done within the access control policy in Cisco FMC to address this concern?
- A. Create a file policy and set the access control policy to allow.
- B. Create a file policy and set the access control policy to block.
- C. Create an intrusion policy and set the access control policy to allow.
- D. Create an intrusion policy and set the access control policy to block.
Answer: B
NEW QUESTION 95
An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of
10.10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network. What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?
- A. Update the IP addresses from IPv4 to IPv6 without deleting from Cisco FMC.
- B. Delete and reregister the device to Cisco FMC.
- C. Format and reregister the device to Cisco FMC.
- D. Cisco FMC does not support devices that use IPv4 IP addresses.
Answer: A
Explanation:
Section: Management and Troubleshooting
NEW QUESTION 96
A network security engineer must export packet captures from the Cisco FMC web browser while troubleshooting an issue. When navigating to the address Error! Hyperlink reference not valid. IP>/capture/CAPI/pcap/test.pcap. an error 403: Forbidden is given instead of the PCAP file. Which action must the engineer take to resolve this issue?
- A. Disable the proxy setting on the browser.
- B. Enable the HTTPS server for the device platform policy.
- C. Use the Cisco FTD IP address as the proxy server setting on the browser.
- D. Disable the HTTPS server and use HTTP instead.
Answer: B
NEW QUESTION 97
An engineer wants to change an existing transparent Cisco FTD to routed mode.
The device controls traffic between two network segments. Which action is mandatory to allow hosts to reestablish communication between these two segments after the change?
- A. implement non-overlapping IP subnets on each segment.
- B. configure multiple BVIs to route between segments.
- C. remove the existing dynamic routing protocol settings.
- D. assign unique VLAN IDs to each firewall interface.
Answer: A
NEW QUESTION 98
An engineer is building a new access control policy using Cisco FMC. The policy must inspect a unique IPS policy as well as log rule matching. Which action must be taken to meet these requirements?
- A. Disable the default IPS policy and enable global logging.
- B. Configure an IPS policy and enable per-rule logging.
- C. Disable the default IPS policy and enable per-rule logging.
- D. Configure an IPS policy and enable global logging.
Answer: D
NEW QUESTION 99
An engineer configures an access control rule that deploys file policy configurations to security zones or tunnel zones, and it causes the device to restart. What is the reason for the restart?
- A. Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices.
- B. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy.
- C. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy.
- D. Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.
Answer: A
NEW QUESTION 100
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?
- A. IRB
- B. FlexConfig
- C. SGT
- D. BDI
Answer: A
NEW QUESTION 101
A network engineer implements a new Cisco Firepower device on the network to take advantage of its intrusion detection functionality. There is a requirement to analyze the traffic going across the device, alert on any malicious traffic, and appear as a bump in the wire How should this be implemented?
- A. Configure a bridge group in transparent mode.
- B. Enable routing on the Cisco Firepower
- C. Add an IP address to the physical Cisco Firepower interfaces.
- D. Specify the BVl IP address as the default gateway for connected devices.
Answer: A
Explanation:
Traditionally, a firewall is a routed hop and acts as a default gateway for hosts that connect to one of its screened subnets. A transparent firewall, on the other hand, is a Layer 2 firewall that acts like a "bump in the wire," or a "stealth firewall," and is not seen as a router hop to connected devices. However, like any other firewall, access control between interfaces is controlled, and all of the usual firewall checks are in place. Layer 2 connectivity is achieved by using a "bridge group" where you group together the inside and outside interfaces for a network, and the ASA uses bridging techniques to pass traffic between the interfaces. Each bridge group includes a Bridge Virtual Interface (BVI) to which you assign an IP address on the network. You can have multiple bridge groups for multiple networks. In transparent mode, these bridge groups cannot communicate with each other. https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/general/asa-97-general-config/intro-fw.html
NEW QUESTION 102
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by bypassing protocol inspection by leveraging pre-filter rules
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html - B. by leveraging the ARP to direct traffic through the firewall
- C. by using a BVI and create a BVI IP address in the same subnet as the user segment
- D. by assigning an inline set interface
Answer: C
NEW QUESTION 103
The administrator notices that there is malware present with an .exe extension and needs to verify if any of the systems on the network are running the executable file. What must be configured within Cisco AMP for Endpoints to show this data?
- A. threat root cause
- B. prevalence
- C. file analysis
- D. vulnerable software
Answer: B
NEW QUESTION 104
A hospital network needs to upgrade their Cisco FMC managed devices and needs to ensure that a disaster recovery process is in place. What must be done in order to minimize downtime on the network?
- A. Configure the Cisco FMC managed devices for clustering.
- B. Keep a copy of the current configuration to use as backup
- C. Configure a second circuit to an ISP for added redundancy
- D. Configure the Cisco FMCs for failover
Answer: D
NEW QUESTION 105
......
300-710 Free Certification Exam Material with 225 Q&As : https://www.newpassleader.com/Cisco/300-710-exam-preparation-materials.html
UPDATED 300-710 Exam Questions Certification Test Engine to PDF: https://drive.google.com/open?id=1P5aQVoto7QBjuyUFXj0mFXue2PZaQV1w