Get Started: 300-710 Exam [2021] Dumps Cisco PDF Questions
300-710 Premium Exam Engine pdf Download
Asked Prerequisites
Officially, there are no mandatory requirements to fulfill before taking up the Cisco 300-710 exam. Anyone can go for it and excel at the career front. But, the preparation process is not as easy as it may sound. So, it is wise to gain adequate industry exposure, saying about three to five years, before appearing for this test. Such a prior understanding will make the exam journey more simplified and effortless.
NEW QUESTION 10
A network engineer is receiving reports of users randomly getting disconnected from their corporate applications which traverses the data center FTD appliance Network monitoring tools show that the FTD appliance utilization is peaking above 90% of total capacity. What must be done in order to further analyze this issue?
- A. Use the Packet Export feature to save data onto external drives
- B. Use the Packet Tracer feature for traffic policy analysis
- C. Use the Packet Analysis feature for capturing network data
- D. Use the Packet Capture feature to collect real-time network traffic
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with-firepower-threat-defense-f.html
NEW QUESTION 11
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 12
An engineer is troubleshooting application failures through a FTD deployment. While using the FMC CLI. it has been determined that the traffic in question is not matching the desired policy. What should be done to correct this?
- A. Use the system support network-options command to fine tune the policy.
- B. Use the system support firewall-engine-debug command to determine which rules the traffic matching and modify the rule accordingly
- C. Use the system support firewall-engine-dump-user-f density-data command to change the policy and allow the application through the firewall.
- D. Use the system support application-identification-debug command to determine which rules the traffic matching and modify the rule accordingly
Answer: B
NEW QUESTION 13
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?
- A. FlexConfig
- B. IRB
- C. SGT
- D. BDI
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/ Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html
NEW QUESTION 14
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator manually updates the policies.
- B. Cisco Firepower gives recommendations to update the policies.
- C. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- D. Cisco Firepower automatically updates the policies.
Answer: B
Explanation:
Ref: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailoring_Intrusion_Protection_to_Your_Network_Assets.html
NEW QUESTION 15
Refer to the exhibit.
An organization has an access control rule with the intention of sending all social media traffic for inspection After using the rule for some time, the administrator notices that the traffic is not being inspected, but is being automatically allowed What must be done to address this issue?
- A. Modify the selected application within the rule
- B. Add the social network URLs to the block list
- C. Change the intrusion policy to connectivity over security.
- D. Modify the rule action from trust to allow
Answer: A
NEW QUESTION 16
The event dashboard within the Cisco FMC has been inundated with low priority intrusion drop events, which are overshadowing high priority events. An engineer has been tasked with reviewing the policies and reducing the low priority events. Which action should be configured to accomplish this task?
- A. drop packet
- B. generate events
- C. drop connection
- D. drop and generate
Answer: D
NEW QUESTION 17
Refer to the exhibit.
An administrator is looking at some of the reporting capabilities for Cisco Firepower and noticed this section of the Network Risk report showing a lot of SSL activity that cloud be used for evasion. Which action will mitigate this risk?
- A. Use Cisco AMP for Endpoints to block all SSL connection
- B. Use SSL decryption to analyze the packets.
- C. Use encrypted traffic analytics to detect attacks
- D. Use Cisco Tetration to track SSL connections to servers.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-ssl-decryption.html
NEW QUESTION 18
Which license type is required on Cisco ISE to integrate with Cisco FMC pxGrid?
- A. apex
- B. base
- C. mobility
- D. plus
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_0111.html#concept_DE1C38E055794B198ED352D1528B5182
NEW QUESTION 19
Which connector is used to integrate Cisco ISE with Cisco FMC for Rapid Threat Containment?
- A. ISEGrid
- B. FTD RTC
- C. pxGrid
- D. FMC RTC
Answer: C
Explanation:
Section: Integration
NEW QUESTION 20
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. BGPv4 in transparent firewall mode
- B. BGPv6
- C. ECMP with up to three equal cost paths across multiple interfaces
- D. ECMP with up to three equal cost paths across a single interface
- E. BGPv4 with nonstop forwarding
Answer: B,D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e
NEW QUESTION 21
An engineer is attempting to create a new dashboard within the Cisco FMC to have a single view with widgets from many of the other dashboards. The goal is to have a mixture of threat and security related widgets along with Cisco Firepower device health information Which two widgets must be configured to provide this information? (Choose two.)
- A. Current Sessions
- B. Correlation Information
- C. Intrusion Events
- D. Appliance Status
- E. Network Compliance
Answer: B,C
NEW QUESTION 22
A network administrator is seeing an unknown verdict for a file detected by Cisco FTD. Which malware policy configuration option must be selected in order to further analyse the file in the Talos cloud?
- A. Spero analysis
- B. Malware analysis
- C. Dynamic analysis
- D. Sandbox analysis
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Reference_a_wrapper_Chapter_topic_here.html
NEW QUESTION 23
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
- A. configure coredump packet-engine enable
- B. capture-traffic
- C. capture
- D. capture WORD
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/ b_Command_Reference_for_Firepower_Threat_Defense/ac_1.html
NEW QUESTION 24
A network engineer is receiving reports of users randomly getting disconnected from their corporate applications which traverses the data center FTD appliance Network monitoring tools show that the FTD appliance utilization is peaking above 90% of total capacity. What must be done in order to further analyze this issue?
- A. Use the Packet Export feature to save data onto external drives
- B. Use the Packet Tracer feature for traffic policy analysis
- C. Use the Packet Analysis feature for capturing network data
- D. Use the Packet Capture feature to collect real-time network traffic
Answer: D
NEW QUESTION 25
An engineer is monitoring network traffic from their sales and product development departments, which are on two separate networks What must be configured in order to maintain data privacy for both departments?
- A. Use a dedicated IPS inline set for each department to maintain traffic separation
- B. Use passive IDS ports for both departments
- C. Use one pair of inline set in TAP mode for both departments
- D. Use 802 1Q mime set Trunk interfaces with VLANs to maintain logical traffic separation
Answer: D
NEW QUESTION 26
Refer to the exhibit.
What must be done to fix access to this website while preventing the same communication to all other websites?
- A. Create an access control policy rule to allow port 443 to only 172.1.1 50
- B. Create an access control policy rule to allow port 80 to only 172.1.1 50.
- C. Create an intrusion policy rule to have Snort allow port 80 to only 172.1.1 50.
- D. Create an intrusion policy rule to have Snort allow port 443 to only 172.1.1.50
Answer: B
NEW QUESTION 27
Within Cisco Firepower Management Center, where does a user add or modify widgets?
- A. reporting
- B. dashboard
- C. summary tool
- D. context explorer
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Using_Dashboards.html
NEW QUESTION 28
Refer to the exhibit. What must be done to fix access to this website while preventing the same communication to all other websites?
- A. Create an intrusion policy rule to have Snort allow port 80 to only 172.1.1.50.
- B. Create an access control policy rule to allow port 443 to only 172.1.1.50.
- C. Create an intrusion policy rule to have Snort allow port 443 to only 172.1.1.50.
- D. Create an access control policy rule to allow port 80 to only 172.1.1.50.
Answer: D
NEW QUESTION 29
An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?
- A. The packets are duplicated and a copy is sent to the destination.
- B. It is transmitted out of the Cisco IPS outside interface.
- C. It is routed back to the Cisco ASA interfaces for transmission.
- D. It is retransmitted from the Cisco IPS inline set.
Answer: C
NEW QUESTION 30
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
- A. DHCP pool disablement
- B. dynamic null route configured
- C. host shutdown
- D. quarantine
- E. port shutdown
Answer: D,E
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/210524-configure-firepower-6-1-pxgrid-remediati.html
NEW QUESTION 31
Which action should you take when Cisco Threat Response notifies you that AMP has identified a file as malware?
- A. Add the malicious file to the block list.
- B. Wait for Cisco Threat Response to automatically block the malware.
- C. Forward the result of the investigation to an external threat-analysis engine.
- D. Send a snapshot to Cisco for technical support.
Answer: A
Explanation:
Section: Integration
NEW QUESTION 32
......
Cisco SNCF 300-710 Practice Test Questions, Cisco SNCF 300-710 Exam Practice Test Questions
The Securing Networks with Cisco Firepower (300-710 SNCF) exam assesses the candidates’ knowledge of Cisco Firepower Threat Defense as well as Firepower 7000 & 8000 Series virtual appliances, including integrations, policy configurations, deployments, management & troubleshooting. The main focus of this test is to equip the professionals with sufficient expertise related to implementing the advanced Next-Generation Intrusion Prevention System (NGIPS) and Next-Generation Firewall (NGFW) features. This encompasses one’s competency in file type detection, network intelligence, deep packet inspection, and network-based malware detection. The 300-710 exam is associated with two Cisco certifications, namely Cisco Certified Specialist – Network Security Firepower and CCNP Security.
How much Securing Networks with Cisco Firepower (300-710 SNCF) Exam Cost
The cost of this exam is USD $300 but prices for Cisco examinations differ according to level and currency. Also exam vouchers can be used for discounts. To find out the cost of your test, click here and choose your country. To learn about prices and locations, visit the CCIE Lab Exam page
Pass Your Cisco Exam with 300-710 Exam Dumps: https://www.newpassleader.com/Cisco/300-710-exam-preparation-materials.html
Verified 300-710 Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1zh6gCPH_QzUGFsa5_GbU3lNRqpxLFBcF