[Dec-2021] Verified F5 Exam Dumps with 201 Exam Study Guide
Best Quality F5 201 Exam Questions NewPassLeader Realistic Practice Exams [2021]
F5 201 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
Understanding of functional and technical aspects of Troubleshooting Basic Virtual Server Connectivity Issues
The following will be discussed in this section:
- Determine if a virtual server is configured for the proper listening port
- Verify the type of persistence profile assigned to the virtual server in question
- Given a specific connectivity issue, isolate where the problem might be according to the processing order
- Validate the expected persistence behavior
- Determine which tools to use in order to diagnose the issue
- Understand the difference between the virtual servers status definitions
- Understand the effects of health monitors on the status of pool members/nodes
- Determine if the pool configuration has an effect on virtual server state
- Determine if a virtual server is configured with the proper IP address configuration
- Use the appropriate tool to troubleshoot persistence
- Explain the concept of âpersistenceâ
- Understand how a packet is processed once it arrives at device (connection table, packet filters, etc.)
NEW QUESTION 115
Assuming there are open connections through an active system's virtual servers and aEl fo av ielr occurs, by default, what happens to the connections.
- A. When persistence mirroring is enabled, open connections are maintained even if a fEl aoilver occurs.
- B. All open connections are lost.
- C. All open connections are maintained.
- D. LongEllived connections such as Telnet and FTP are maintained,
but shortEllived connections such as HTTP are lost. - E. All open connections are lost, but new connections are initiated by the newly active BIGElIP, resulting in minimal client downtime.
Answer: B
NEW QUESTION 116
A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?
- A. tracepath 10.10.3.75:8080 GET /index
- B. curlhttp://10.10.10.3.75:8080/www.example.com/index.html
- C. tracepath 'http://www.example.com:80
- D. curl-header 'Host:www.example.com' http://10.10.3.75:8080/
Answer: D
NEW QUESTION 117
Refer to the exhibit.
How many nodes are represented on the network map shown?
- A. Three
- B. Four
- C. Two
- D. One
Answer: A
NEW QUESTION 118
A BIG-IP Administrator runs the initial configuration wizard and learns that the NTP servers were invalid. In which area of the Configuration Utility should the BIG-IP Administrator update the list of configured NTP servers?
- A. System > Platform
- B. System > Services
- C. System > Configuration
- D. System > Preferences
Answer: C
NEW QUESTION 119
A BIG-IP Administrator suspects that one of the BIG-IP device power supplies is experiencing power outages.
Which log file should the BIG-IP Administrator check to verify the suspicion?
- A. /var/log/kern.log
- B. /war /log/daemon.log
- C. /var/log/audit
- D. /var/log/ltm
Answer: D
NEW QUESTION 120
A BIG-IP Administrator adds new Pool Members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users. What pool level setting should the BIG-IP Administrator check?
- A. Action On Service Down
- B. Availability Requirement
- C. Allow SNAT
- D. Slow Ramp Time
Answer: D
Explanation:
Option ABC is a global configuration, has nothing to do with the new pool member, select D after excluding
NEW QUESTION 121
A BIG-IP Administrator upgrades the BIG-IP LTM to a newer software version. After the administrator reboots into the new volume, the Configuration fails to load. Why is the Configuration failing to load?
- A. The upgrade was performed on the standby unit.
- B. The license needs to be reactivated before the upgrade.
- C. Connectivity to the DNS server failed to be established.
- D. A minimum of at least two reboots is required.
Answer: B
NEW QUESTION 122
Which must be sent to the license server to generate a new license.
- A. the system's dossier
- B. the system's purchase order number
- C. the system's base license
- D. the system's host name
Answer: A
NEW QUESTION 123
A BIG-IP Administrator reviews the log files to determine the cause of a recent problem and finds the following entry.
Mar 27.07.58.48 local/BIG-IP notice mcpd {5140} 010707275 Pool member 172.16.20.1.10029 monitor status down.
What is the cause of this log message?
- A. The monitor attached to the pool member needs a higher timeout value.
- B. The pool member has been marked as Down by the BIG-IP Administrator.
- C. The pool member has been disabled.
- D. The monitor attached to the pool member has failed.
Answer: D
NEW QUESTION 124
Which two can be a part of a pool's definition. (Choose two.)
- A. persistence type
- B. monitor(s)
- C. profile(s)
- D. rule(s)
- E. loadElbalancing mode
Answer: B,E
NEW QUESTION 125
Refer to the exhibit.
Which TMSH command generated this output?
- A. tmsh show /cm sync status
- B. tmsh list /sys sync-status
- C. tmsh list /cm sync-status
- D. tmsh show /sys sync-status
Answer: A
NEW QUESTION 126
Refer to the exhibit.
According to the shown Configuration Utility stings What is the setting of the User Directory configuration under the Authentication submenu?
- A. Default system configuration
- B. Local
- C. Managed
- D. Remote-TACACS+
Answer: D
NEW QUESTION 127
A standard virtual server is defined with a pool and a SNAT using automap. All other settings for the virtual server are at defaults. When client traffic is processed by the BIGElIP, what will occur to the IP addresses.
- A. Traffic initiated by the pool members will have the source address translated to a selfElIP address but the destination address will not be changed.
- B. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source addressTraffic initiated to the virtual server will have the destination address translated to a pool member. address and the source address translated to a selfElIP address. Traffic arriving destined to other destinations will have the source translated to a selfElIP address only.
- C. Traffic
initiated by selected clients, based
on their IP address, will have the source address translated to a selfElIP address but the destination will only be translated if the traffic is destined to the virtual server. - D. Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source addressTraffic initiated to the virtual server will have the destination address translated to a pool member. address and the source address translated to a selfElIP address.
Answer: D
NEW QUESTION 128
A BIG-IP Administrator wants to add a new Self IP to the BIG-IP device. Which item should be assigned to the new Self IP being configured?
- A. Trunk
- B. VLAN
- C. Interface
- D. Route
Answer: B
NEW QUESTION 129
How should a BIG-IP Administrator control the amount of traffic that a newly enabled pool member receives.
- A. set a Health Monitor
- B. set the Slow Ramp Time
- C. set the Priority Group Activation
- D. set a Connection Limit
Answer: B
Explanation:
Specifies the duration during which the system sends less traffic to a newly-enabled pool member. The amount of traffic is based on the ratio of how long the pool member has been available compared to the slow ramp time, in seconds. Once the pool member has been online for a time greater than the slow ramp time, the pool member receives a full proportion of the incoming traffic. Slow ramp time is particularly useful for the least connections load balancing mode.
Setting this to a nonzero value can cause unexpected Priority Group behavior, such as load balancing to a low-priority member even with enough high-priority servers.
NEW QUESTION 130
A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version.
Which two tools could the administrator leverage to verify known issues for the target versions?
(Choose two.)
- A. F5 Downloads
- B. FSiHealth
- C. F5 Bug Tracker
- D. F5 University
- E. F5 End User Diagnostics (EUD)
Answer: B,C
Explanation:
Explanation
F5 University -- F5 learning materials
F5 Downloads - iso download page
F5 End User Diagnostics (EUD) -- Hardware detection
NEW QUESTION 131
......
Authentic Best resources for 201: https://www.newpassleader.com/F5/201-exam-preparation-materials.html
201 Test Engine Practice Exam: https://drive.google.com/open?id=1WSqpentdnyD96Feyu-cT3ezD0oSGEN0s