Updated Nov-2023 MS-203 Exam Practice Test Questions
Verified MS-203 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump
NEW QUESTION # 159
Your company has a Microsoft Exchange Online subscription for an email domain named contoso.com.
The company works with a partner company that uses an email domain named tailspintoys.com.
You need to configure the environment only to accept email from tailspintoys.com if the email is sent from an IP address of 131.107.12.85.
How should you configure the connector from the Exchange admin center? To answer, drag the appropriate options to the correct message settings. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/use-connectors-to-configure-mail-flow/set-up-connectors-for-secure-mail-flow-with-a-partner
NEW QUESTION # 160
You need to configure the environment to support the planned changes for email addresses.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
References:
https://docs.microsoft.com/en-us/powershell/module/exchange/email-addresses-and-address-books/new-emailaddresspolicy?view=exchange-ps
https://docs.microsoft.com/en-us/Exchange/email-addresses-and-address-books/email-address-policies/email-address-policies?view=exchserver-2019
NEW QUESTION # 161
Your company has an Exchange Online tenant.
A partner company named Fourth Coffee also uses Exchange Online.
You need to ensure that the users at your company share free busy information with the users at Fourth Coffee. The solution must ensure that the meeting details included in the calendars of your company users remain hidden from the Fourth Coffee users.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/new-organizationrelationship?view=exchange-ps
NEW QUESTION # 162
Your company has the offices shown in the following table.
The company has a Microsoft Exchange Online tenant that contains the users shown in the following table.
You have the following Exchange Online client access rules.
You create a new client access rule by using the following command.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/client-access-rules/procedures-for-client-access-rules
https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/client-access-rules/client-access-rules
NEW QUESTION # 163
Use the drop-down menus to select the answer choice that complete each statement based on the information presented in the Exchange Online Connector exhibit.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 164
You have a Microsoft Exchange Server 2019 hybrid deployment that contains the users shown in the following table.
You need to provide each user with an archive mailbox that is stored in Exchange Online.
Which admin center should you use to perform the configuration for each user? To answer, drag the appropriate admin centers to the correct users. Each admin center may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/enable-archive-mailboxes
https://docs.microsoft.com/en-us/exchange/hybrid-deployment/create-cloud-based-archive
NEW QUESTION # 165
You need to resolve the issue for the transport department users.
What is the best way to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.
- A. Move TransportPF to a public folder mailbox hosted in the main office.
- B. Instruct the transport department users to add TransportPF to their Favorites list in Outlook.
- C. Modify the default public folder mailbox for all the transport department users.
- D. Move the public folder mailbox that contains TransportPF to a server in the main office.
Answer: A
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/exchange/recipients/mailbox-moves?view=exchserver-2019
NEW QUESTION # 166
You have a Microsoft Exchange Online tenant that contains two groups named Group1 and Group2. You need to configure threat policies to meet the following requirements:
* URLs in email messages sent to Group1 must be scanned before the user can read the messages.
* Email messages sent to Group2 must be protected against spoofed senders.
Which type of policy should you configure for each requirement? To answer, drag the appropriate policy types to the correct groups. Each policy type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 167
Your company named Contoso, Ltd. has a Microsoft Exchange Server 2019 organization that contains the mailbox databases shown in the following table.
You need to assign an offline address book (OAB) named Managers to all the users in a group named Managers.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Topic 1, Litware, inc
Case Study
Overview
Litware, Inc. is food service supplier in Europe.
Physical Locations
Litware has a main office in Paris and branch offices in Munich, London, Brussels, Vienna, and Rome.
Each branch office has its own compliance officer.
Existing Environment
The network contains one Active Directory forest named litware.com. The forest contains a single Active Directory domain. Each office is configured as an Active Directory site.
Each branch office is represented organizational unit (OU) in an OU named Offices in Active Directory.
Each branch office has a special Administrators group that contains the delegated administrators for that office. Each Administrators group is named based on its location in a format of RegionalAdmins_Brussels, RegionalAdmins_Munich, RegionalAdmins_London, RegionalAdmins_Vienna and RegionalAdmins_Rome.
Network Infrastructure
Each office contains two domain controllers from the litware.com domain. All the domain controllers are configured as DNS servers. All client computers connect only to the DNS servers in their respective office.
All offices have a high-speed connection to the Internet. Each office connects to the Internet by using a VPN appliance.
Each office has the following servers and client computers:
One reverse proxy appliance
One Microsoft Exchange Server 2019 server
One Windows Server Update Services (WSUS) server
Computers that run Windows 10 and have Microsoft Office 2019 installed.
The office in Brussels contains an Exchange Server 2016 server that has the Unified Messaging role installed and hosted voicemail configured.
Mailboxes are hosted on all the Exchange servers. Public folders are hosted only on an Exchange server in the main office. Litware uses a disjoint namespace to access the servers.
Each user has an archive mailbox. Archiving is configured to use the default settings.
Exchange services are published to the internet by using a reverse proxy in each office.
A full backup of Exchange is performed nightly. Incremental backups occur every six hours.
All the users in the transport department connect to network resources by using a connection in the main office.
Requirements
Planned Changes
Litware plans to implement the following changes:
Implement calendar sharing to partner companies.
Implement a solution that prevents malware from being delivered to end users.
Use personal archives to eliminate the need for PST files.
Ensure the Brussels office and move all the users in the Brussels office to the main office. All the mailboxes in the Brussels office will be moved to a server in the main office.
Implement a compliance solution to ensure that items deleted from public folders are retained. If an item in a public folder is modified, the original version of the item must be available.
Technical Requirements
Litware identifies the following technical requirements:
Minimize administrative effort.
Use the principle of least privilege.
Ensure that junk email is deleted automatically after 14 days.
Ensure that sent items and deleted items are deleted automatically after 30 days.
Ensure that users in the customer service department can open multiple mailboxes.
Ensure that all the former Brussels office users always maintain access to hosted voicemail.
Ensure that the staff in the IT department can manage the email environment without and-user involvement.
Ensure that users cannot recover email messages that are deleted from the Junk Email folder and the Deleted Items.
Ensure that if an email message has a spam confidence level (SCL) of 3 or higher, the message automatically moves to the Junk Email folder.
Problem statements
The transport department users report that accessing a public folder named TransportPF is sometimes very slow.
Users in the customer service department report that Microsoft Outlook sometimes hangs when many mailboxes are open.
NEW QUESTION # 168
You have a Microsoft Exchange Online tenant.
You plan to create a mail flow rule that will forward email messages containing specific words to a user's manager for approval.
You need to test the rule. The solution must meet the following requirements:
* Prevent users from being notified that their message was forwarded to their manager.
* Support the tracking of messages that match the rule by using message tracing.
Which two settings should you modify? To answer, select the settings in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
D:\mudassar\Untitled.jpg
NEW QUESTION # 169
You need to implement a solution to meet the technical requirements for the SCL.
How should you complete the command? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/organization/set-organizationconfig?
NEW QUESTION # 170
Your company has a Microsoft 365 subscription for a domain named contoso.com.
The company acquires a company named Litware, Inc. that uses an IMAP-based messaging system. The SMTP domain of Litware is named litwareinc.com.
You need to migrate the mailboxes of Litware to Microsoft Office 365. The solution must ensure that users from Litware can receive email by using their current email address.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/exchange/mailbox-migration/migrating-imap-mailboxes/migrating-imap-mailboxes
NEW QUESTION # 171
You have a Microsoft Exchange Server 2019 organization.
You need to identify which accounts in Active Directory are assigned permissions to dismount mailbox databases.
How should you complete the command? To answer, drag the appropriate values to the correct targets. Each value may he used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/exchange/find-exchange-cmdlet-permissions?view=exchange-ps
NEW QUESTION # 172
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to ensure that all email sent or received by a user named Diego Siciliani is preserved in Exchange Online. The solution must prevent Diego Siciliani from permanently deleting any email messages for 180 days.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
You need configure a Retention Policy. You could also use a Litigation Hold but Retention Policies are replacing Litigation Holds in future, so a Retention Policy is the way to go.
In the Microsoft 365 Compliance Center, go to the Policies section and click Retention.
Click the New retention policy link.
Enter a name for the policy (such as "Diego Siciliani Email Retention") and click Next.
In the retention period, enter 180 days and click Next.
Ensure that only Exchange email is selected. SharePoint sites, OneDrive accounts and Office 365 groups are also selected by default so you may need to deselect them.
Click the Choose recipients link for Exchange email.
Click the Choose recipients button to open a list of recipients.
Select Admin1 and click the Choose button then click the Done button.
Click Next.
Click the Create this policy button.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/retention-policies
NEW QUESTION # 173
You have a Microsoft Exchange Server 2019 organization and a Microsoft 365 E5 subscription.
From the Microsoft 365 admin center, you open Data migration as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
References:
https://www.stellarinfo.com/blog/hybrid-migration-migrate-exchange-mailboxes-office-365/
https://www.kerneldatarecovery.com/blog/migrate-from-exchange-on-premises-to-exchange-online-in-hybrid-environment/
NEW QUESTION # 174
You need to implement a solution to support the planned changes for the branch office administrators.
What should you do?
- A. Assign the Mail Recipients role to the branch office administrators and use a default management scope.
- B. Assign the Recipient Policies role to the branch office administrators and use a default management scope.
- C. Assign the Mail Recipients role to the branch office administrators and create a custom management scope.
- D. Assign the Recipient Policies role to the branch office administrators and create a custom management scope.
Answer: C
Explanation:
Ensure that the branch office administrators can configure the properties of the mailboxes in their respective offices only.
Reference:
https://docs.microsoft.com/en-us/exchange/mail-recipients-role-exchange-2013-help This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
NEW QUESTION # 175
You need to generate a report for the mobile devices that meets the technical requirements.
Which PowerShell cmdlet should you use?
- A. Get-MobileDevice
- B. Get-MobileDeviceStatistics
- C. Get-DeviceTenantPolicy
- D. Get-DevicePolicy
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/get-mobiledevice?view=exchange-ps
NEW QUESTION # 176
You need to ensure that Alex Wilber can recover deleted items when using Outlook on the web.
Which two actions should you perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Remove Alex Wilbur from all groups.
- B. Modify Marketing Policy.
- C. Assign Sales Policy to Alex Wilbur.
- D. Assign Policy2 to Alex Wilbur.
- E. Modify Policy1
Answer: D
NEW QUESTION # 177
You need to create an address list that contains all the users who have a title of Director.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/email-addresses-and-address-books/new-addresslist?view=exchange-ps
NEW QUESTION # 178
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to prevent email messages from a domain named fabrikam.com from being delivered to the mailboxes of your organization.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
See explanation below
Explanation:
In the Microsoft 365 Defender portal at https://security.microsoft.com, go to Email & Collaboration > Policies & Rules > Threat policies > Anti-spam in the Policies section. To go directly to the Anti-spam policies page, use https://security.microsoft.com/antispam.
On the Anti-spam policies page, click Create policy and then select Inbound from the drop down list.
The policy wizard opens. On the Name your policy page, configure these settings:
- Name: Enter a unique, descriptive name for the policy.
- Description: Enter an optional description for the policy.
When you're finished, click Next.
On the Users, groups, and domains page that appears, identify the internal recipients that the policy applies to (recipient conditions):
- Users: The specified mailboxes, mail users, or mail contacts in your organization.
- Groups: The specified distribution groups, mail-enabled security groups, or Microsoft 365 Groups in your organization.
- Domains: All recipients in the specified accepted domains in your organization.
Click in the appropriate box, start typing a value, and select the value that you want from the results. Repeat this process as many times as necessary. To remove an existing value, click remove × next to the value.
For users or groups, you can use most identifiers (name, display name, alias, email address, account name, etc.), but the corresponding display name is shown in the results. For users, enter an asterisk (*) by itself to see all available values.
Multiple values in the same condition use OR logic (for example, <recipient1> or <recipient2>). Different conditions use AND logic (for example, <recipient1> and <member of group 1>).
- Exclude these users, groups, and domains: To add exceptions for the internal recipients that the policy applies to (recipient exceptions), select this option and configure the exceptions. The settings and behavior are exactly like the conditions.
When you're finished, click Next.
On the Bulk email threshold & spam properties page that appears, configure the following settings:
- Bulk email threshold: Specifies the bulk complaint level (BCL) of a message that triggers the specified action for the Bulk spam filtering verdict that you configure on the next page (greater than the specified value, not greater than or equal to). A higher value indicates the message is less desirable (more likely to resemble spam). The default value is 7. For more information, see Bulk complaint level (BCL) in EOP and What's the difference between junk email and bulk email?.
By default, the PowerShell only setting MarkAsSpamBulkMail is On in anti-spam policies. This setting dramatically affects the results of a Bulk filtering verdict:
- Increase spam score, Mark as spam* and Test mode: Advanced Spam Filter (ASF) settings that are turned off by default.
The Contains specific languages and from these countries settings are not part of ASF.
- Contains specific languages: Click the box and select On or Off from the drop down list. If you turn it on, a box appears. Start typing the name of a language in the box. A filtered list of supported languages will appear. When you find the language that you're looking for, select it. Repeat this step as many times as necessary. To remove an existing value, click remove × next to the value.
- From these countries*: Click the box and select On or Off from the drop down list. If you turn it on, a box appears. Start typing the name of a country in the box. A filtered list of supported countries will appear. When you find the country that you're looking for, select it. Repeat this step as many times as necessary. To remove an existing value, click remove × next to the value.
When you're finished, click Next.
On the Actions page that appears, configure the following settings:
- Message actions: Select or review the action to take on messages based on the following spam filtering verdicts:
- Retain spam in quarantine for this many days: Specifies how long to keep the message in quarantine if you selected Quarantine message as the action for a spam filtering verdict. After the time period expires, the message is deleted, and is not recoverable. A valid value is from 1 to 30 days.
- Add this X-header text: This box is required and available only if you selected Add X-header as the action for a spam filtering verdict. The value you specify is the header field name that's added to the message header. The header field value is always This message appears to be spam.
- Prepend subject line with this text: This box is required and available only if you selected Prepend subject line with text as the action for a spam filtering verdict. Enter the text to add to the beginning of the message's subject line.
- Redirect to this email address: This box is required and available only if you selected the Redirect message to email address as the action for a spam filtering verdict. Enter the email address where you want to deliver the message. You can enter multiple values separated by semicolons (;).
- Enable safety Tips: By default, Safety Tips are enabled, but you can disable them by clearing the checkbox.
- Enable zero-hour auto purge (ZAP): ZAP detects and takes action on messages that have already been delivered to Exchange Online mailboxes.
ZAP is turned on by default. When ZAP is turned on, the following settings are available:
When you're finished, click Next.
On the Allow & block list flyout that appears, you are able to configure message senders by email address or email domain that are allowed to skip spam filtering.
In the Allowed section, you can configure allowed senders and allowed domains. In the Blocked section, you can add blocked senders and blocked domains.
The steps to add entries to any of the lists are the same:
- Click the link for the list that you want to configure:
- In the flyout that appears, do the following steps:
When you're finished, click Add senders or Add domains.
- Back on the main flyout, the senders or domains that you added are listed on the page. To remove an entry from this page, do the following steps:
When you're finished, click Done.
Back on the Allow & block list page, click Next when you're read to continue.
On the Review page that appears, review your settings. You can select Edit in each section to modify the settings within the section. Or you can click Back or select the specific page in the wizard.
When you're finished, click Create.
On the confirmation page that appears, click Done.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/security/office-365-security/configure-your-spam-filter-policies?view=o365-worldwide
NEW QUESTION # 179
You have a Microsoft Exchange Online subscription.
You run the following command.
Set-ActiveSyncOrganizationSettings -DefaultAccessLevel Block
You run Get-ActiveSyncDeviceAccessRule | f1 Identity, AccessLevel, Characteristic, QueryString and you receive the following output.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 180
You need to configure the new smartboard to support the planned changes.
Which three settings should you configure? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/exchange/recipients-in-exchange-online/manage-resource-mailboxes
NEW QUESTION # 181
You are migrating mailboxes from a Microsoft Exchange Server 2016 organization to Exchange Online. The mailbox migrations are configured to suspend, and you plan to perform a coordinated cutover.
Which PowerShell command should you run to complete all the suspended mailbox migrations? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/move-and-migration/get-moverequest?view=exchange-ps
https://docs.microsoft.com/en-us/powershell/module/exchange/move-and-migration/resume-moverequest?view=exchange-ps
NEW QUESTION # 182
You have a Microsoft Exchange Online tenant.
Archive mailboxes are enabled for all users. You need to ensure that the default size of each user's archive mailbox increases automatically when the mailbox approaches the storage limit. The solution must apply automatically to all current and future mailboxes.
How should you complete the PowerShell command? To, answer select the appropriate options in the answer area.
Answer:
Explanation:
Explanation
Set-Mailbox -Identity * -ArchiveQuota "Unlimited"
To ensure that the default size of each user's archive mailbox increases automatically when the mailbox approaches the storage limit and to apply the solution automatically to all current and future mailboxes, you can use the Set-Mailbox cmdlet in PowerShell and specify the -ArchiveQuota parameter.
Here is an example of how you could complete the PowerShell command:
Copy code
Set-Mailbox -Identity * -ArchiveQuota "Unlimited"
This command will set the archive mailbox size to unlimited for all mailboxes in the tenant.
Please note that, when you set the archive mailbox size to unlimited, the user's mailbox will continue to grow until it reaches the available storage space in the tenant.
You could also set a specific size limit, for example:
Copy code
Set-Mailbox -Identity * -ArchiveQuota "50 GB"
This command will set the archive mailbox size to 50 GB for all mailboxes in the tenant.
You can then use the Get-Mailbox cmdlet to verify the new archive mailbox size for all mailboxes in the tenant:
Copy code
Get-Mailbox -Identity * | Select DisplayName, ArchiveQuota
This command will return the DisplayName and ArchiveQuota properties for all mailboxes in the tenant.
NEW QUESTION # 183
You need to recommend a procedure for closing the Brussels office that meets the technical requirements.
What should you recommend?
- A. Deploy a Microsoft Skype for Business 2019 server to the main office, and then move the mailboxes from the Brussels office to an Exchange Server 2019 server in the main office.
- B. Implement a new mailbox database on an Exchange Server 2019 server in the main office, and then move the mailboxes from the Brussels office to the new mailbox database.
- C. Implement a new database availability group (DAG) that contains the server in the Brussels office and a new Exchange Server 2019 server in the main office, and then create a mailbox database copy on the new server in the main office.
- D. In the main office, deploy an Exchange Server 2016 server that has the Unified Messaging role installed, and then move the mailboxes from the Brussels office to the new server.
Answer: B
Explanation:
References:
https://docs.microsoft.com/en-us/exchange/architecture/mailbox-servers/manage-mailbox-moves?view=exchserver-2019
https://theitbros.com/move-exchange-mailboxes-to-another-database/
NEW QUESTION # 184
......
Ultimate Guide to Prepare Free MS-203 Exam Questions and Answer: https://drive.google.com/open?id=1J6jp-6pnvjpHy2WvVr1MMJDarotHZSQ3
Pass Microsoft 365 Certified MS-203 Exam With 372 Questions: https://www.newpassleader.com/Microsoft/MS-203-exam-preparation-materials.html