Updated Jan 13, 2022 Verified Pass 1Y0-241 Exam in First Attempt Guaranteed
Free 1Y0-241 Sample Questions and 100% Cover Real Exam Questions (Updated 65 Questions)
Citrix 1Y0-241 Exam Certification Details:
| Passing Score | 61% |
| Recommended Training / Books | CNS-225: Deploy and Manage Citrix ADC 13.x with Traffic Management |
| Number of Questions | 64 |
| Exam Name | Deploy and Manage Citrix ADC 13 with Traffic Management (CCA-AppDS) |
| Exam Code | 1Y0-241 |
| Sample Questions | Citrix 1Y0-241 Sample Questions |
| Schedule Exam | PEARSON VUE |
| Exam Price | $200 USD |
| Duration | 90 minutes |
Recommended Skills and Training Experience
The vendor recommends that those learners who want to take the Citrix 1Y0-241 exam must fulfill specific prerequisites before registering for it. First things first, they need to have at least 6 months of proven experience and should have been working with the following concepts:
- High availability
- Securing and troubleshooting the Citric ADC
- Rewrite, Responder, and URL Transform
- Default policies
- Load balancing (as well as Global server load balancing)
- Basic networking
- Optimization of traffic
- Content switching
- SSL Offload
- Citrix ADC platforms
In addition to the above areas, one should be competent in administering Linux Server and Windows, compression concepts, and DNS, among the rest.
NEW QUESTION 10
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Bind the GSLB domain to the GSLB vServer.
- B. Configure CS policies that designate a load-balancing vServer as the target vServer.
- C. Bind the domain to the CS vServer instead of the GSLB vServer.
- D. Configure a CS vServer of target type GSLB.
Answer: B,D
NEW QUESTION 11
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
- A. drop
- B. process
- C. route
- D. bridge
Answer: C
Explanation:
Explanation/Reference:
Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/configure- system-settings/configure-modes-packet-forwarding.html
NEW QUESTION 12
When a Citrix ADC high availability (HA) pair failover occurs, by what method does the Citrix ADC communicate to the network switches and routers that IP-to-MAC address bindings have changed?
- A. Proxy ARP to update the network devices
- B. Reverse ARP (RARP) to update the network devices
- C. Gratuitous ARPs (GARPs) to update the network devices
- D. MAC-based forwarding (MBF) to update the routers
Answer: C
NEW QUESTION 13
Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 -policyName CSPOL_7 -priority 100 -gotoPriorityExpression NEXT bind cs vServer vserver1 -policyName CSPOL_5 -priority 90 bind cs vServer vserver1 -policyName CSPOL_9 -priority 110 bind cs vServer vserver1 -policyName CSPOL_4 -priority 120 bind cs vServer vserver1 -policyName CSPOL_8 -priority 210 Policy CSPOL_7 has been invoked.
Which policy will be invoked next?
- A. CSPOL_5
- B. CSPOL_8
- C. CSPOL_9
- D. CSPOL_4
Answer: A
NEW QUESTION 14
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. DNS
- B. Integrated caching
- C. System
- D. SSL
Answer: A,B
NEW QUESTION 15
Scenario: A Citrix Administrator downloaded and deployed Citrix Application Delivery Management (ADM) in an environment consisting of six Citrix ADCs and 100 virtual servers. When viewing the Citrix ADM console, the administrator sees only 30 virtual servers.
Why is the administrator unable to see all 100 virtual servers?
- A. Additional Citrix ADM systems need to be deployed to see all virtual servers.
- B. The nsroot passwords are NOT the same across all the Citrix ADCs.
- C. Citrix ADM is using a free license.
- D. The Citrix ADC and Citrix ADM firmware versions are NOT the same.
Answer: A
NEW QUESTION 16
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) - HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?
- A. 10.1.100.100:443
- B. http://www.site1.com/mysite1/maintenance
- C. vServer-LB-2
- D. Backup content switching vServer
Answer: B
NEW QUESTION 17
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP on port 99
- B. HTTP-ECV on port 80
- C. HTTP_ECV on port 99
- D. HTTP on port 80
Answer: C
NEW QUESTION 18
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
- B. Purchase another Citrix ADC MPX appliance.
- C. Plug another 10G Citrix ADC port into the router.
- D. Add two more 10G Citrix ADC ports to the network and configure VLAN.
Answer: A
NEW QUESTION 19
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?
- A. Turn on Independent Network Configuration (INC) mode.
- B. Configure SyncVlan
- C. Turn on HA monitoring on all interfaces
- D. Turn on fail-safe mode.
Answer: A
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/ configuring-high-availability-nodes-different-subnets.html
NEW QUESTION 20
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. DNS
- B. Integrated caching
- C. System
- D. SSL
Answer: A,B
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/policies-and-expressions/ introduction-to-policies-and-exp/classic-and-advanced-policy.html
NEW QUESTION 21
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?
- A. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto
"https://server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*" - B. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*" - C. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto
"https://server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*" - D. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
Answer: A
NEW QUESTION 22
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) - HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence:
NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?
- A. 10.1.100.100:443
- B. http://www.site1.com/mysite1/maintenance
- C. vServer-LB-2
- D. Backup content switching vServer
Answer: B
NEW QUESTION 23
Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?
- A. DNS Record
- B. DNS View
- C. DNS Preferred Location
- D. DNS Proxy
Answer: B
NEW QUESTION 24
The Citrix ADC SDX architecture allows instances to share ___________ and __________. (Choose the two correct options to complete the sentence.)
- A. a physical interface
- B. memory
- C. a CPU
- D. the kernel
Answer: B,C
NEW QUESTION 25
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image optimization
- B. Image lazy loading
- C. Image shrink-to attributes
- D. Domain sharding
Answer: A
NEW QUESTION 26
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC MPX
- B. Citrix ADC VPX
- C. Citrix ADC SDX
- D. Citrix ADC CPX
Answer: D
Explanation:
Explanation/Reference: https://www.citrix.com.br/products/citrix-adc/cpx-express.html
NEW QUESTION 27
Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?
- A. Run highly availability (HA) file synchronization.
- B. Run saved versus running configuration.
- C. Restore from the revision history.
- D. Restart the Citrix ADC.
Answer: C
NEW QUESTION 28
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID " ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?
- A. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
- B. bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- C. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- D. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
Answer: B
NEW QUESTION 29
Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition. This will allow them to add resources for different departments and manage them without making changes to the default Citrix ADC partition and configuration.
One team member typing to use the command line interface (CLI) to troubleshoot an authentication issue could NOT use aaad.debug. However, the team member has full permissions on the admin partition.
What can be the cause of this issue?
- A. The team member does NOT have permission to use the CLI.
- B. The team member does NOT have shell access by design.
- C. The team member needs to troubleshoot the issue from the GUI.
- D. The team member is NOT using the CLI correctly.
Answer: D
NEW QUESTION 30
Scenario: A Citrix Administrator is managing a Citrix Gateway with a standard Platform license and remote employees in the environment. The administrator wants to increase access by 3,000 users through the Citrix Gateway using VPN access.
Which license should the administrator recommend purchasing?
- A. Citrix ADC Upgrade
- B. Citrix ADC Burst Pack
- C. Citrix Gateway Express
- D. Citrix Gateway Universal
Answer: D
NEW QUESTION 31
A Citrix Administrator is creating a new SSL vServer and notices the ns_default_ssl_profile frontend SSL profile is automatically bound to the SSL vServer.
Which two actions can the administrator perform to change or remove the ns_default_ssl_profile_frontend SSL profile once it is enabled? (Choose two.)
- A. Globally disable the ns_default_ssl_profile_frontend SSL profile.
- B. Create a separate SSL profile.
- C. Unbind the ns_default_ssl_profile_frontend SSL profile from the SSL vServer without binding a replacement SSL profile.
- D. Globally unbind the ns_default_ssl_profile_frontend SSL.
- E. Unbind the default SSL profile and bind the newly created SSL profile.
Answer: A,E
NEW QUESTION 32
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?
- A. Configure a failover interface set on each Citrix ADC VPX instance.
- B. Configure LACP on the SDX for management interface.
- C. Add a second interface to each Citrix ADC VPX instance.
- D. Configure LACP on the SDX for the data interface.
Answer: D
Explanation:
Explanation/Reference: https://training.citrix.com/public/Exam+Prep+Guides/241/1Y0-
241_Exam_Preparation_Guide_v01.pdf
NEW QUESTION 33
......
Official Study Guide
The Citrix 1Y0-241 official study guide should top your list if you are looking for one of the best materials to break into the IT industry easily. This guide can be found on the Citrix official website and covers vital exam details to help learners understand what they will be expected to know to attain this certificate. Because the Citrix 1Y0-214 test is focused on candidates’ ability to deploy the Citrix ADC 13 solutions, they should showcase superb networking skills and the ability to integrate different solutions with the Citrix ADC environments. And this is one of the biggest roles played by this study guide. You will find factual exam details, review questions, and additional information about critical aspects such as the scheduling protocols.
Download Real Citrix 1Y0-241 Exam Dumps Test Engine Exam Questions: https://www.newpassleader.com/Citrix/1Y0-241-exam-preparation-materials.html
Verified 1Y0-241 Dumps Q&As - 1Y0-241 Test Engine with Correct Answers: https://drive.google.com/open?id=1cBtyMyE3lRm-Dl0uu0hf8Dqt5lmeGs9S