SAP Certified C_IBP_2205 Dumps Questions Valid C_IBP_2205 Materials
Current C_IBP_2205 Exam Dumps [2022] Complete SAP Exam Smoothly
C_IBP_2205 Exam Certification Details:
| Exam: | 80 questions |
| Level: | Associate |
| Sample Questions: | SAP C_IBP_2205 Exam Sample Question |
| Duration: | 180 mins |
NEW QUESTION 26
You create an S&OP operator for heuristics on an SAP IBP project. What must you enable for the S&OP operator that is specifically relevant for subnetworks?
- A. Compute Expected Supply parameter
- B. Supply propagation
- C. Normalize Quotas parameter
- D. Balance Receipts parameter
Answer: A
NEW QUESTION 27
Which of the following are features of the S&OP process templates?Note: There are 2 correct answers to this question.
- A. Each step depicted in the template can have tasks associated with it.
- B. The S&OP process step can be started with an application job.
- C. All process templates are assigned to dashboards.
- D. New instances of templates allow for re-use of the same processes.
Answer: A,D
NEW QUESTION 28
How can you make charts and dashboards private?
- A. Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.
- B. Enable the relevant settings in the global configuration parameters.
- C. Choose only relevant key figures and filters in the Analytics Advanced application.
- D. Set restrictions for charts in the Permission filter application.
Answer: B
NEW QUESTION 29
You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.
- A. Change scenario-specific master data.
- B. Run a scenario-specific demand sensing job.
- C. Run a scenario-specific inventory optimization job.
- D. Share data with other users.
- E. Display data in analytics.
Answer: C,D,E
NEW QUESTION 30
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results?Note: There are 2 correct answers to this question.
- A. The attribute should be assigned to all planning levels.
- B. The Business Meaning of the attribute has been specified.
- C. The attribute should be a non-key attribute of the master data type.
- D. The attribute belongs to a simple or compound master data type.
Answer: C,D
NEW QUESTION 31
What are the relevant use cases for helper key figures?Note: There are 2 correct answers to this questions.
- A. Used when you have more than three inputs at different planning levels in one calculation
- B. Used to break down a large calculation into manageable subcalculations
- C. Used at any level of calculation level except the Request Level
- D. Used by end-users in planning views to help visualize cross-period calculations
Answer: A,B
NEW QUESTION 32
Which of these conditions must be met to create a Local Member key figure?
- A. Use Excel Cell References in Report Editor is selected.
- B. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
- C. A key figure is created in the Planning Area app.
- D. Activate Local Member Recognition is selected.
Answer: D
NEW QUESTION 33
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Lead time variability
- B. Lot sizes
- C. Reorder point
- D. Target inventory level
Answer: B,C
NEW QUESTION 34
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Embedded, on-the-fly demand analytics
- B. Detailed statistical analysis of demand data using the supply chain algorithm library
- C. Demand sensing of demand data using the supply chain algorithm library
- D. Detailed statistical analysis of demand data using predictive analytics tools
- E. Demand sensing of demand data using predictive analytics tools
Answer: A,C,D
NEW QUESTION 35
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note:
There are 3 correct Answers to this question.
- A. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- B. You can add (or delete) planning objects to a planning view after these filters are applied.
- C. You can only apply one value-based filter per planning view.
- D. These filters are always applied based on the values stored in the database.
- E. These filters can be used together with attribute totals in the same planning view.
Answer: A,C,D
NEW QUESTION 36
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.
- A. A forecast metric key figure, such FCSTMAPE
- B. A unit of measure key figure, such as UOMCONVERSIONFACTOR
- C. A currency conversion key figure, such as exchange rate
- D. A special key figure marked as an aggregate key figure (aggregate constraint)
Answer: B,D
NEW QUESTION 37
You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.
- A. LOCATIONFR
- B. SOURCEPRODUCTION
- C. SOURCECUSTOMER
- D. sourcelocation
Answer: C,D
NEW QUESTION 38
What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.
- A. Use drill-down functionality.
- B. Add process templates.
- C. Link two analytics charts.
- D. Rename the charts.
- E. Display all assigned analytics on a single UI.
Answer: A,B,E
NEW QUESTION 39
Why would you set up a cascading filter in the planning view?Note: There are 2 correct answers to this question.
- A. To filter attributes based on other attribute filters
- B. To filter data in an Application Job template
- C. To filter attributes based on specific values
- D. To filter using attributes that have a large number of values
Answer: C,D
NEW QUESTION 40
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Master Data
- B. Purge Non-Confirming Data
- C. Purge Key Figure Data
- D. Purge Key Figure Data Outside Planning Area Planning Horizon
Answer: C
NEW QUESTION 41
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.
- A. Specifying target key figure that is time independent is possible.
- B. Specifying target key figure is mandatory.
- C. Specifying source key figure is mandatory.
- D. Selecting by attribute with option 'contain' is possible.
Answer: B,C
NEW QUESTION 42
You need to make manual adjustments to your S&OP plan.Which are possible ways of making these changes?Note: There are 2 correct answers to this question.
- A. Using Driver-Based planning
- B. Leveraging the web-based planning capability
- C. Using Microsoft Excel planning views
- D. Leveraging the functionality of SAP Workzone
Answer: B,C
NEW QUESTION 43
Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question.
- A. Target key figures for these snapshots are exposed to the user in planning views.
- B. Target key figures for these snapshots must have lag as a root attribute.
- C. Lag-based snapshots are automatically assigned to a snapshot operator.
- D. Lag-based snapshots are created in the Configuration app for a fixed time range.
Answer: B,C
NEW QUESTION 44
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using key figure calculation
- B. Using aggregation mode average
- C. Using attribute as a key figure
- D. Using local member
Answer: B
NEW QUESTION 45
You are working to realign the data due to a recent warehouse closure.What should you be aware of in regards to the realignment steps settings?Note: There are 2 correct answers to this question.
- A. A realignment step can change master data, planning objects and key figures.
- B. The number of steps in the realignment run is limited to 255.
- C. The name of the realignment step should be no longer than 20 characters.
- D. You must mark the realignment step as "shared" and assign the steps to users.
Answer: A,D
NEW QUESTION 46
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct Answers to this question.
- A. Jobs in the Applications Jobs app
- B. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- C. Planning view templates in the SAP IBP add-in for Microsoft Excel
- D. Supply chain graph in Supply Chain Network app
Answer: A,C
NEW QUESTION 47
Which applications are present in the sample model SAPIBP1?Note: There are 3 correct answers to this question.
- A. Inventory Optimization
- B. Demand Sensing
- C. Sales and Operations Planning
- D. Response Planning
- E. Demand Driven Replenishment
Answer: A,B,C
NEW QUESTION 48
......
SAP C_IBP_2205 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| S&OP Review < 8% | Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans. |
| General Configuration of a Planning Area > 12% | Display, create, copy, edit, check, and activate a planning area. |
| Demand Planning 8% - 12% | Create statistical forecast using historical data with basic methods. |
| Key Figures & Attributes > 12% | Create and use key figures and attributes. |
| Analytics and Reporting < 8% | Define and view information with user-defined charts and dashboards. |
| Inventory < 8% | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. |
| Planning Operators & Application Jobs > 12% | Use Planning Operators. |
| Supply and Response > 12% | Configure supply planning, run various solvers to generate planning results |
C_IBP_2205 Premium PDF & Test Engine Files with 80 Questions & Answers: https://www.newpassleader.com/SAP/C_IBP_2205-exam-preparation-materials.html