Reliable CCTE 156-585 Dumps PDF Oct 22, 2021 Recently Updated Questions
Pass Your CheckPoint 156-585 Exam with Correct 116 Questions and Answers
CheckPoint 156-585 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 65
What are some measures you can take to prevent IPS false positives?
- A. Use IPS only in Detect mode
- B. Capture packets. Update the IPS database, and Back up custom IPS files
- C. Use Recommended IPS profile
- D. Exclude problematic services from being protected by IPS (sip, H 323, etc )
Answer: D
NEW QUESTION 66
You have configured IPS Bypass Under Load function with additional kernel parameters ids_tolerance_no_stress=15 and ids_tolerance_stress-15 For configuration you used the *fw ctl set' command After reboot you noticed that these parameters returned to their default values What do you need to do to make this configuration work immediately and stay permanent?
- A. Set these parameters again with "fw ctl set" and save configuration with "save config"
- B. Set these parameters again with "fw ctl set" and edit appropriate parameters in $FWDIR/boot/modules/ fwkern.conf
- C. Edit appropriate parameters in $FWDIR/boot/modules/fwkern.conf
- D. Use script $FWDIR/bin IpsSetBypass.sh to set these parameters
Answer: B
Explanation:
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk62848&partition=Advanced&product=IPS
NEW QUESTION 67
The two procedures available for debugging in the firewall kernel are
i fw ctl zdebug
ii fw ctl debug/kdebug
Choose the correct statement explaining the differences in the two
- A. (i) Is used for general debugging, has a small buffer and is a quick way to set kernel debug flags to get an output via command line whereas (11) is useful when there is a need for detailed debugging and requires additional steps to set the buffer and get an output via command line
- B. (i) is used to debug the access control policy only, however (n) can be used to debug a unified policy
- C. (i) is used to debug only issues related to dropping of traffic, however (n) can be used for any firewall issue including NATing, clustering etc.
- D. (i) is used on a Security Gateway, whereas (11) is used on a Security Management Server
Answer: A
NEW QUESTION 68
How many captures does the command "fw monitor -p all" take?
- A. The -p option takes the same number of captures, but gathers all of the data packet
- B. 1 from every inbound and outbound module of the chain
- C. All 4 points of the fw VM modules
- D. All 15 of the inbound and outbound modules
Answer: D
NEW QUESTION 69
Which command is used to write a kernel debug to a file?
- A. fw ctl kdebug -T -f > debug.txt
- B. fw ctl debug -S -t > debug.txt
- C. fw ctl debug -T -f > debug.txt
- D. fw ctl kdebug -T -l > debug.txt
Answer: A
NEW QUESTION 70
What is the benefit of running "vpn debug trunc over "vpn debug on"?
- A. "vpn debug trunc* provides verbose capture
- B. No advantage one over the other
- C. "vpn debug trunc*truncates the capture hence the output contains minimal capture
- D. "vpn debug trunc" purges ike.elg and vpnd elg and creates limestarnp while starting ike debug and vpn debug
Answer: D
NEW QUESTION 71
Which of the following is contained in the System Domain of the Postgres database?
- A. Trusted GUI clients
- B. Configuration data of log servers
- C. Saved queries for applications
- D. User modified configurations such as network objects
Answer: D
NEW QUESTION 72
If the cpsemd process of SmartEvent has crashed or is having trouble coming up. then it usually indicates that___________.
- A. Postgres database ts down
- B. Cpd daemon is unable to connect to the log server
- C. The logged in administrator does not have permissions to run SmartEvent
- D. The SmartEvent core on the Solr mdexer has been deleted
Answer: D
NEW QUESTION 73
What are four main database domains?
- A. System, User, Host, Network
- B. Local, Global, User, VPN
- C. System, Global, Log, Event
- D. System, User, Global, Log
Answer: D
NEW QUESTION 74
Where will the usermode core files be located?
- A. SCPDIR/var/log/dump/usermode
- B. SFWDlR/var'log/dump/usermode
- C. /var/log/dump/usermode
- D. /var/suroot
Answer: C
NEW QUESTION 75
Which situation triggers an IPS bypass under load on a 24-core Check Point appliance?
- A. a single CPU core must be above the threshold for more than 10 seconds, but is must be the same core during this time
- B. the average cpu utilization over all cores must be above the threshold for 1 second
- C. any of the CPU cores is above the threshold for more then 10 seconds
- D. all CPU core most be above the threshold for more than 10 seconds
Answer: C
NEW QUESTION 76
What command is usedtofind out which port Multi-Portal has assigned to the Mobile Access Portal?
- A. mpclient getdata sslvpn
- B. mpclient getdata mobi
- C. netstat -nap | grep mobile
- D. netstat getdata sslvpn
Answer: D
NEW QUESTION 77
Which Threat Prevention daemon is the core Threat Emulator, engine and responsible for emulation files and communications with Threat Cloud?
- A. scrub
- B. inmsd
- C. ted
- D. ctasd
Answer: C
Explanation:
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk97638
NEW QUESTION 78
What is connect about the Resource Advisor (RAD) service on the Security Gateways?
- A. RAD is completely loaded as a kernel module that looks up URL in cache and if not found connects online for categorization There isno user space involvement in this process
- B. RAD functions completely in user space The Pattern Matter (PM) module ofthe CMI looks up for URLs in the cache and if not found, contact the RAD process inuser space to do online categorization
- C. RAD has a kernel module that looks up the kernel cache, notifies client about hits and misses andforwards a-sync requests to RADuser space module which is responsible for online categorization
- D. RAD is not a separate module, it is an integrated function of the 'fw1 kernel module and does all operations in the kernel space
Answer: B
NEW QUESTION 79
Which one of the following is NOT considered a Solr core partition:
- A. CPM_0_Disabled
- B. CPM_Gtobal_R
- C. CPM_Global_A
- D. CPM_0_Revisions
Answer: B
NEW QUESTION 80
What command is usually used for general firewall kernel debugging andwhatis the sizeofthe buffer that isautomaticallyenabled whenusingthe command?
- A. fw dl zdebug, buffer size is 1 MB
- B. fw ctl debug, buffer sizeis 1024 KB
- C. fw ctl kdeoug. buffer sizeis 32000 KB
- D. fw ell zdebug. buffer size is 32768 KB
Answer: C
NEW QUESTION 81
Joey is configuring a site-to-site VPN with his business partner. On Joey's site he has a Check Point R80.10 Gateway and his partner uses Cisco ASA 5540 as a gateway.
Joey's VPN domain on the Check Point Gateway object is manually configured with a group object that contains two network objects:
VPN_Domain3 = 192.168.14.0/24
VPN_Domain4 = 192.168.15.0/24
Partner's site ACL as viewed from "show run"
access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.14.0 255.255.255.0 access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.15.0 255.255.255.0 When they try to establish VPN tunnel, it fails. What is the most likely cause of the failure given the information provided?
- A. Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation due to the algorithm mismatch.
- B. Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/24 and 192.168.15.0/24, but the peer expects the one network 192.168.14.0/23
- C. Tunnel fails on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/23, but the peer expects the two distinct networks 192.168.14.0/24 and 192.168.15.0/24.
- D. Tunnel fails on Joey's site, because he misconfigured IP address of VPN peer.
Answer: C
NEW QUESTION 82
What are the four ways to insert an FW Monitor into the firewallkernel chain?
- A. Absolute position using location, absolute position using alias, relative position, all positions
- B. Relative position using geolocation relative position using inertial navigation, absolute position all positions
- C. Relative position using location, relativepositionusing alias, absolute position, all positions
- D. Absolute position using location, relative position using alias, general position, all positions
Answer: B
NEW QUESTION 83
......
Latest 2021 Realistic Verified 156-585 Dumps: https://www.newpassleader.com/CheckPoint/156-585-exam-preparation-materials.html
Pass 156-585 Exam Updated 116 Questions: https://drive.google.com/open?id=1bi_KN0KlEBllo0oQpT5lOhxHSr0I6Kh-