Use Real HPE0-S57 Dumps - HP Correct Answers updated on 2021
HPE ASE HPE0-S57 Exam Practice Dumps
NEW QUESTION 30
A customer requires front panel access for their Gen10 servers.
What is required to meet this need?
- A. an installed iLo Advance license
- B. a USB 2.0 Ethernet adapter
- C. Secure Boot enabled
- D. Two-factor authentication enabled
Answer: B
Explanation:
Explanation
https://d8tadude.com/2018/03/06/hpe-ilo-service-port/
NEW QUESTION 31
Refer to the exhibit.
You are using NinjaStars to size a Nimble storage array to fulfill a customers requirements and you see the output shown in the exhibit. What should you change to make this a supported configuration?
- A. Increase the SSD size to get a higher Flash-to-Disk ratio.
- B. Increase the number of disks to fulfill the requirement of 40 TB of capacity.
- C. increase the size of selected disks to fulfill the requirement of 40 TB of capacity.
- D. Remove the 2-port 10 G baseT since the customer requires FC connectivity only
Answer: D
NEW QUESTION 32
A customer has the following design requirements:
* support for 16Gb Fibre Channel
* The management console must be HPE OneView
Which component must be included in the design to meet the customer's requirements?
- A. HPE Virtual Connect SE 16Gb FC Module for HPE Synergy
- B. HPE Synergy 8Gb FC License Upgrade
- C. Brocade 16Gb Fibre Channel SAN Switch Module for HPE Synergy
- D. HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
Answer: A
NEW QUESTION 33
Which HPE Server family is purpose built for HPC workloads, Big Data Analytics, object storage, and enterprise service provider needs?
- A. HPE Edgeline servers
- B. HPE Apollo server
- C. HPE ProLiant DL servers
- D. HPE Synergy servers
Answer: B
Explanation:
Explanation/Reference: https://www.hpe.com/emea_europe/en/storage/apollo-4000.html
NEW QUESTION 34
You are designing a solution that will utilize HPE SimpliVity as the solution platform.
Which additional components are required and should be documented in your design? (Choose two.)
- A. vCenter or SCVMM
- B. SCCM
- C. SCOM
- D. HPE SimpliVity Arbiter Service
Answer: A,D
NEW QUESTION 35
A customer wants to see how the HPE DL380 Gen10 servers have been placed in the rack you just configured in OCA Click on the exhibit where you would enable this feature in OCA.
Answer:
Explanation:
NEW QUESTION 36
In preparation for a customer presentation, you need to be able to propose a solution that estimates power and weight requirements, and appropriate levels of power and cooling. You also need to determine weight-related requirements to install the solution in the data center.
What should you use?
- A. HPE Power Advisor
- B. HPE Server Memory Configurator
- C. HPE Synergy Planning Tool
- D. HPE Proposal Web
Answer: C
Explanation:
Explanation
"The Synergy Planning Tool is designed to guide proper system configuration, slotting, power and weight information for a Synergy Solution"
NEW QUESTION 37
Match each feature to the correct storage platform.
Answer:
Explanation:
NEW QUESTION 38
After meeting with a customer and gathering basic capacity and performance metrics, you are ready to recommend an HPE 3PAR storage solution.
Which HPE sizing tool should be used to architect the solution, create a ready-to-order bill of materials, and present the customer with a graphic representation of the solution being proposed?
- A. HPE InfoSight
- B. HPE 3PAR STaTs
- C. HPE Storage Sizer Tool
- D. HPE NinjaSTARS
Answer: D
NEW QUESTION 39
A customer is planning to refresh their network infrastructure, and wants to manage bandwidth for critical applications and gain end-to-end visibility of network performance and utilization They also need tools to help them manage their networking inventory.
Which HPE Solution should you recommend?
- A. Composable Fabric Manager
- B. InfoSight
- C. OneView for VMware vCenter
- D. Introspect
Answer: C
NEW QUESTION 40
You are offering a startup service of StoreOnce 3620 to a customer.
Which customer need will require an additional Pointnext service?
- A. integration of StoreOnce and a backup ISV application
- B. setup and demonstration of the configuration to one host
- C. creation of the installation plan
- D. installation of hardware to the rack
Answer: A
Explanation:
Protect your business beyond warranty with HPE Support Services HPE Pointnext Services delivers confidence, reduces risk and helps customers realize agility and stability. Our integrated portfolio of Services for storage help customers reduce costs, optimize data, streamline storage management, and improve backup and recovery.
Reference: http://4rgroup.com/sanpham/product-doc/HPE-StoreOnce-Systems.pdf
NEW QUESTION 41
A customer has expressed concerns about the security of using RESTful API to do a survey against their existing infrastructure.
What should you say about the REST client to alleviate the customer's concerns?
- A. It uses SNMP v3
- B. It uses WBEM
- C. It uses HTTPS.
- D. It uses SNMP v2.
Answer: C
NEW QUESTION 42
A customer has acquired a company and must integrate all IT assets Into a single data center Each company uses HPE SimpliVity as the hardware platform, but one uses HyperV and the other uses VMware as the hypervisor What are valid options for consolidating this environment?
- A. Run and manage separate SimpiVity clusters for each hypervisor.
- B. Utilize HPE OneVlew to convert VMs from Hyper-v to VMware
- C. Redploy all nodes Into a single cluster running containers.
- D. Combine all nodes Into a single cluster running both VMware and Hyper-V hypervisors
Answer: B
NEW QUESTION 43
You are designing a network topology for a customer. The customer is looking for a large-scale Layer 2 fabric, with redundant links and load balancing, while avoiding traditional STP, RSTP, and MSTP protocols.
Which switch will support these features with industry standard technology?
- A. Aruba 8325
- B. HPE FlexFabric 12902E
- C. HPE FlexFabric 5710
- D. HPE FlexFabric 5980
Answer: B
Explanation:
Explanation
https://h20195.www2.hpe.com/v2/getpdf.aspx/c04111378.pdf
NEW QUESTION 44
You propose a Nimble HF40 solution with 4x 10GbaseT ports to a customer The raw capacity Is 500 TIB The customers growth expectations have changed, and they now request the solution to support 1000 TiB of raw storage instead.
Match the possible update to the solution with the description.
Answer:
Explanation:
NEW QUESTION 45
You have been asked to architect an HPE 3PAR storage solution and integrate it into a customers existing mufti-vendor SAN Which tools should you consult to verity interoperability of your proposed solution? (Select two)
- A. HPE lanamark
- B. HPE Single Point of Connectivity Knowledge
- C. HPE SAN Design Guide
- D. HPE InfoSlght
- E. HPE Product Bulletin
Answer: A,B
NEW QUESTION 46
In preparation for a customer presentation, you need to be able to propose a solution that estimates power and weight requirements, and appropriate levels of power and cooling. You also need to determine weight-related requirements to install the solution in the data center.
What should you use?
- A. HPE Power Advisor
- B. HPE Server Memory Configurator
- C. HPE Synergy Planning Tool
- D. HPE Proposal Web
Answer: A
NEW QUESTION 47
You propose a Nimble HF40 solution with 4x 10GbaseT ports to a customer The raw capacity Is 500 TIB The customers growth expectations have changed, and they now request the solution to support 1000 TiB of raw storage instead.
Match the possible update to the solution with the description.
Answer:
Explanation:
NEW QUESTION 48
A customer is looking for a new platform to support their AI research projects.
Which technology should you recommend?
- A. Multi-core GPUs
- B. Peer Persistence
- C. Availability clustering
- D. Persistent memory
Answer: B
NEW QUESTION 49
Which HPE solution uses Integrated Lights Out (iLO) and Integrated Systems Manager (iSM) for an optimal infrastructure management experience?
- A. HPE Edgeline 4000
- B. HPE SimpliVity 2600
- C. HPE Apollo 8000 series
- D. HPE Synergy 12000 Frame
Answer: A
NEW QUESTION 50
A customer is a cloud provider who needs a new storage array. They want a solution that has built-in multi- tenancy features.
Why should you propose HPE 3PAR StoreServ to the customer?
- A. It divides controller nodes into groups for multiple tenants.
- B. It divides drives into separate pools for multiple tenants.
- C. It includes the virtual domains feature as part of all-inclusive licensing.
- D. It includes the NPARs feature for physical separation of the array into tenant areas.
Answer: B
Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/v2/getpdf.aspx/4aa3-3516enw.pdf
NEW QUESTION 51
......
Get ready to pass the HPE0-S57 Exam right now using our HPE ASE Exam Package: https://www.newpassleader.com/HP/HPE0-S57-exam-preparation-materials.html