Latest Network Appliance NS0-516 First Attempt, Exam real Dumps Updated [Oct-2021]
Get the superior quality NS0-516 Dumps Questions from NewPassLeader. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!
NEW QUESTION 77
Which SANtricity installation package contains the graphical user interface that configures a storage system?
- A. SMutils
- B. SMcli
- C. SMclient
- D. SMagent
Answer: C
NEW QUESTION 78
What measurement refers to the number of read/write requests that can be handled in a 1-second time period? (Choose the best answer.)
- A. Parity
- B. I/O alignment
- C. Read modify write
- D. Throughput
- E. IOPS
Answer: E
NEW QUESTION 79
Where can you enter scripts in the SANtricity user interface?
- A. In the EMW on the Setup tab
- B. In the EMW on the Devices tab
- C. In the AMW on the Setup tab
- D. In the AMW on the Storage & Copy Services tab
Answer: B
NEW QUESTION 80
Which feature under SANtricity 11.x which requires an activation key? (Choose the best answer.)
- A. Volume copy
- B. Drive Security
- C. Mirroring
- D. Snapshot copies
Answer: C
NEW QUESTION 81
Which item can be downloaded concurrently with controller firmware? (Choose the best answer.)
- A. NVSRAM
- B. ESM firmware
- C. SANtricity software
- D. Drive firmware
Answer: A
NEW QUESTION 82
Which two actions must be performed to enable iSCSI multipathing on Windows for NetApp E-Series systems? (Choose two.)
- A. Create two VSANs on the iSCSI switches
- B. Set up iSCSI IP addresses on the E-Series system and the Windows host
- C. Install the Host Utilities on the Windows host
- D. Install a Host Channel Adapter (HCA) on the Windows host
Answer: B,C
NEW QUESTION 83
What file on a Windows management host server contains information about the storage system management connections?
- A. mgmt.cfg
- B. EMWdata_vxx.bin
- C. the event log
- D. AMWcfg_vxx.bin
Answer: B
NEW QUESTION 84
What is the first step when replacing a FRU component on a running storage system? (Choose the best answer.)
- A. Remove the part and check SANtricity for continuing errors.
- B. Use SANtricity to view the target component and place the component off-line or in service mode before removing the part.
- C. Power down the array before changing the part.
- D. Disconnect the cables from the management ports.
Answer: B
NEW QUESTION 85
A company wants the most scalable host-side connection topology for E-Series systems. In this scenario, which FC topology would satisfy the requirement?
- A. fabric attach
- B. arbitrated loop
- C. private loop
- D. direct connect
Answer: A
NEW QUESTION 86
Which three are techniques for troubleshooting the management connection? (Choose three.)
- A. Restart the agent (in-band).
- B. Delete the EMWdata_vxx.bin file (in- and out-of-band).
- C. Ping the controller ports (out-of-band).
- D. Check the Ethernet cables (out-of-band).
Answer: A,C,D
NEW QUESTION 87
A customer has an E-Series system with several expansion enclosures and can use the ______ to determine if the connections between the enclosures have been cabled correctly. (Choose the best answer.)
- A. Recovery Guru
- B. Host Mappings tab
- C. Major Event Log
- D. Cable Connections report
Answer: D
NEW QUESTION 88
A company implemented Automatic Load Balancing (ALB). When the controller workloads are monitored, it becomes obvious that there is an imbalance and that ALB is not working correctly. In this scenario, what are two causes of the problem? (Choose two)
- A. The company implemented a host type that does not support ALB
- B. The company implemented a host multipath driver that does not support AL
- C. The company implemented an adaptive load balancing agent that does not support AL
- D. The company implemented a load balancing min-min algorithm that does not support AL
Answer: A,B
NEW QUESTION 89
The decision to use FC or iSCSI on the 5500 Controller with a 4-port 16Gb/s FC or 10Gb/s iSCSI Optical SFP+ HIC (Host Interface Card) can be ___________. (Choose the best answer.)
- A. based upon the SFP type
- B. ignored because both can be used at the same time
- C. set at the factory, based on the order
- D. changed at any time by SANtricity
Answer: A
NEW QUESTION 90
What would be the minimum configuration required to support a drawer-protected 20-drive DDP? (Choose the best answer.)
- A. An E2624 with four DE5600 Expansion Chassis, containing a total of 6, 1.6TB SSD and 96, 3T NL-SAS drives.
- B. An E5424 with one DE5600 Expansion Chassis, containing a total of 48, 900GB SAS drives.
- C. An E5460 with one DE6600 Expansion Chassis, containing a total of 120, 3TB NL-SAS drives.
- D. An E2712 with one DE6600 Expansion Chassis, containing a total of 72, 3TB NL-SAS drives.
Answer: C
NEW QUESTION 91
Consult the ___________ to determine the current link status of a host port. (Choose the best answer.)
- A. Recovery Guru
- B. Real-time performance monitor
- C. Storage Array Profile
- D. Unreadable Sectorslog
Answer: C
NEW QUESTION 92
A customer has launched a data analytics initiative and has been transferring old data into the new data lake. The customer has discovered some data read errors during the transfer process.
In this scenario, how should the customer have avoided these data integrity issues?
- A. by turning on cyclic redundancy checks (CRCs)
- B. by deploying secure-capable drives
- C. by turning on erasure coding
- D. by ensuring that data assurance and media scan are always activated
Answer: D
NEW QUESTION 93
You are setting-up asynchronous mirroring between two E2860 systems.
In this scenario, which two prerequisites are required to complete the setup? (choose two)
- A. The secondary system must have 2X the storage capacity of the primary system
- B. Both systems must be discovered by an Enterprise Management Window (EMW) or SANtricity Unified Manager
- C. Both the primary and secondary systems must have the same premium features licensed
- D. both the primary and secondary systems must be using the same subnets for mirroring connections
Answer: B,C
NEW QUESTION 94
Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two)
- A. Configure In-Band Management
- B. Test SSO login
- C. Map roles
- D. Configure LDAP
Answer: C,D
NEW QUESTION 95
Exhibit:
Referring to the exhibit, which cable is an InfiniBand 4X connector?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 96
When you arrive on a customer site, you discover that the customer network administrator has called in sick. While required power has been provided and all of the components ordered have been physically accounted for, the network will not be operational today.
Which would be the most useful tool to complete your rack & stack and initial configuration of the system? (Choose the best answer.)
- A. a CD containing the 10.86 version of SANtricity
- B. a Serial Port cable
- C. None of the above, come back tomorrow.
- D. a standalone switch or hub
Answer: A
NEW QUESTION 97
In the Array Management window, which tab provides access to the Ethernet management port configuration and premium feature enablement?
- A. Host Mappings
- B. Hardware
- C. Setup
- D. Configuration
- E. Storage & Copy Services
Answer: C
NEW QUESTION 98
For SAN zoning of E-Series systems, what type of relationship between host ports and storage system ports is a common industry practice?
- A. many-to-many
- B. many-to-one
- C. one-to-one
- D. two-to-two
Answer: C
NEW QUESTION 99
An administrator is asked to create an asynchronous mirroring environment that supports multiple mirroring relationships, each with different recovery point objectives (RPOs).
In this scenario, how does the administrator create this environment?
- A. The administrator creates multiple mirror consistency groups with the appropriate RPOs
- B. The administrator creates a mirror group with the appropriate RPOs
- C. The administrator creates multiple mirror pairs, each with their own schedule and RPO
- D. The administrator creates a single consistency group with multiple RPOs
Answer: B
NEW QUESTION 100
What is the maximum number of FC host interface cards used per NetApp EF600 storage array?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 101
Which statement describes a drive channel?
- A. It is replicated for each controller.
- B. It is defined by a host connection.
- C. It is the physical SAS link between a controller shelf and disk shelves that transfers I/O data.
- D. It is the physical Ethernet link between the host and disk shelves that transfers controller commands.
Answer: C
NEW QUESTION 102
......
Network Appliance Practice Test Engine with NS0-516 Questions: https://drive.google.com/open?id=1ELy6xoCb2zxdnww0llYDu3OQ636BWWf3
Guaranteed Success with Valid Network Appliance NS0-516 Dumps: https://www.newpassleader.com/NetworkAppliance/NS0-516-exam-preparation-materials.html