[Q25-Q46] Attested 220-1101 Dumps PDF Resource [2023]

Share

Attested 220-1101 Dumps PDF Resource [2023]

Latest 220-1101 Actual Free Exam Questions Updated 175 Questions

NEW QUESTION 25
While implementing a non-carrier-grade wireless backhaul, a technician notices the current channel selection is externally polluted with various RF signals. Upon performing a spectral analysis, the technician discovers a channel containing almost no RF pollution. Unfortunately, the technician is unable to select that channel. Which of the following is the MOST likely reason for this issue?

  • A. The channel is reserved for licensed band use.
  • B. The channel must be unblocked by the vendor.
  • C. The device requires a firmware update to unlock the channel.
  • D. The channel selection is defective, contact the manufacturer.

Answer: C

 

NEW QUESTION 26
The Chief Executive Officer wants to ensure company data is stored in a manner that provides the company with complete control over how the data is managed. Which of the following is the BEST cloud deployment model for this request?

  • A. Community
  • B. Private
  • C. Hybrid
  • D. Public

Answer: B

 

NEW QUESTION 27
A technician is configuring a new CAD workstation that has four large hard drives. The workstation will be used to edit large, critical files, so the storage configuration should be both fast and redundant. Which of the following RAID levels BEST meets these requirements?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 28
A user reports that printed receipts have black smudges over the entire image. The text is still present but is very dark and sometimes illegible. Which of the following are the MOST likely cause and solution for the printer issue?

  • A. The ribbon is jammed and is rubbing on the paper. Clear the bad ribbon and feed it through properly.
  • B. The printhead is too hot. Adjust the temperature down and retry printing.
  • C. The printer is loaded with the wrong type of paper. Replace the receipt paper with carbon paper.
  • D. The blue ink cartridge was loaded with black ink. Put in the correct ink and clean the printhead.

Answer: C

 

NEW QUESTION 29
A user on a SOHO network is unable to watch online videos, even at 240 pixels. The technician runs ipconfig from the user's computer and records the following:

The technician then connects a test laptop to the router via the user's Cat 5 cable and records the following information:

Which of the following is MOST likely causing the user's issue?

  • A. Bad network cable
  • B. Faulty NIC
  • C. Misconfigured default gateway
  • D. Incorrect IP address

Answer: B

 

NEW QUESTION 30
A technician made several upgrades to a computer and then determined the power supplied by the PSU is insufficient. Which of the following would MOST likely cause the insufficiency? (Select TWO).

  • A. Upgrading the firmware
  • B. Adding a CMOS battery
  • C. Replacing the HDD with an SSD
  • D. Upgrading the graphics card
  • E. Adding an optical drive
  • F. Adding more RAM

Answer: D,E

Explanation:
https://www.buildcomputers.net/power-consumption-of-pc-components.html

 

NEW QUESTION 31
A laptop PC user is reporting issues with the hard drive. A filesystem check shows that all files are accessible and the filesystem is clean. After the check, the PC still issues a hard drive error message. Which of the following is the MOST likely cause of the error?

  • A. DIMM failure
  • B. IOPS failure
  • C. RAID failure
  • D. S.M.A.R.T failure

Answer: D

 

NEW QUESTION 32
A user takes a tablet to a technician because the cursor on it keeps drifting. The technician notices the screen does not appear to be damaged. Which of the following is the MOST likely cause of the cursor issue?

  • A. The screen rotation is incorrect.
  • B. The screen is physically damaged.
  • C. The screen needs to be recalibrated.
  • D. The touch-pen battery is depleted.

Answer: D

 

NEW QUESTION 33
While implementing a non-carrier-grade wireless backhaul, a technician notices the current channel selection is extremely polluted with various RF signals. Upon performing a spectral analysis, the technician discovers a channel containing almost no RF pollution. Unfortunately, the technician is unable to select that channel. Which of the following is the MOST likely reason for this issue?

  • A. The channel is reserved for licensed band use.
  • B. The channel must be unlocked by the vendor.
  • C. The device requires a firmware update to unlock the channel.
  • D. The channel selection is defective; contact the manufacturer.

Answer: C

 

NEW QUESTION 34
A technician is implementing a SOHO wireless solution with three access points. Which of the following actions would avoid high latency?

  • A. Configuring all devices with different channels
  • B. Enabling and configuring a 5GHz antenna
  • C. Enabling multiple SSIDs
  • D. Configuring separate IP ranges

Answer: D

 

NEW QUESTION 35
A user requested upgrades to a company-issued laptop to increase its performance while working with a large database stored on drive C.
Which of the following tasks should a systems administrator complete to BEST meet this goal? (Select TWO).

  • A. Increase the RAM.
  • B. Migrate to a SSD.
  • C. Upgrade to 1GB NIC.
  • D. Configure RAID 1.
  • E. Upgrade the power supply.
  • F. Install a hybrid drive.

Answer: A,F

Explanation:
CompTIA covers it in page 97 of the comptia A+ complete study guide.

 

NEW QUESTION 36
A technician logs on to a PC and inserts an encrypted USB drive. When opening File Explorer, the technician cannot see the USB drive. Which of the following tools should the technician use to see all drives?

  • A. DiskPart
  • B. Disk Cleanup
  • C. Diskmgml
  • D. BitLocker

Answer: D

 

NEW QUESTION 37
A user submitted a ticket to report an issue with a new printer that is no longer accepting new print jobs. The technician verifies the printer is on and notices the printer LCD screen has the following error message:
Paper Jam, Jam in fuser.
Which of the following is the MOST efficient next step the technician should complete?

  • A. Replace the fuser.
  • B. Turn the printer on and off to see if the error clears.
  • C. Check the printer paper path to locate any obstructions.
  • D. Apply a maintenance kit to the printer

Answer: C

 

NEW QUESTION 38
An office manager reports that a printer is experiencing performance issues. Printouts are smudging when they are handled, and. recently, whenever the manager tries to print oversized documents, the paper jams before anything is printed on it.

Answer:

Explanation:
A picture containing text, electronics, printer Description automatically generated

 

NEW QUESTION 39
An online retailer would like to add capacity to support increased sales. Additional servers have been installed.
Which of the following should be used to ensure each new server is being properly utilized?

  • A. Load balancer
  • B. Clustering
  • C. Round-robin DNS
  • D. Virtualization

Answer: D

 

NEW QUESTION 40
A technician is replacing a computer with a connected point-of-sale system using a 9-pin serial adapter. The new computer does not have a 9-pin serial port. Which of the following ports can an adapter be installed on in order to connect to the point-of-sale system?

  • A. Bluetooth
  • B. HDMI
  • C. Lightning
  • D. USB

Answer: B

 

NEW QUESTION 41
A technician is selling up a projector (or a videoconferencing system. When the user all empts to connect a laptop to the system, the system displays the following error message.
No source found
The user tries multiple cables and inputs on the projector. Which of the following should the user try NEXT?

  • A. Check the display settings on the computer and set them to extend/duplicate.
  • B. Replace the projector with another known-good one and try again.
  • C. Replace the video card on the machine that is plugged in to the projector, as it has gone bad.
  • D. Check the bulb on the projector and replace it with a new one.

Answer: A

 

NEW QUESTION 42
Which of the following is a method that can be used to securely connect a remote user's laptop to a corporate server?

  • A. WAN
  • B. VPN
  • C. SSL
  • D. DHCP

Answer: B

 

NEW QUESTION 43
A user's computer is not receiving a network connection. The technician confirms that the connection seems to be down and looks for the user's port on the patch panel. The port and patch panel are not labeled. Which of the following network tools should the technician use to identify the port?

  • A. Punchdown tool
  • B. Network tap
  • C. Toner probe
  • D. Crimper

Answer: C

Explanation:
Toner Probe Many cable testers also incorporate the function of a toner probe, which is used to identify a cable from within a bundle. This may be necessary when the cables have not been labeled properly. The tone generator is connected to the cable using an RJ45 jack and applies a continuous audio signal on the cable. The probe is used to detect the signal and follow the cable over ceilings and through ducts or identify it from within the rest of the bundle.

 

NEW QUESTION 44
An administrator is configuring a corporate-owned smartphone for a new manager. The company requires the ability to wipe the phone's data remotely in the event of loss or theft and the capability to approve applications installed on the phone. Which of the following tools would BEST meet this need?

  • A. Tethering to a corporate-owned laptop
  • B. Mobile device management
  • C. Corporate enterprise email
  • D. WPA2-Enterpise wireless

Answer: B

 

NEW QUESTION 45
Laura, a customer, has instructed you to configure her home office wireless access point.
She plans to use the wireless network for finances and has requested that the network be setup with the highest encryption possible.
Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that her network is not being interfered with by the other networks.
She requests that the default settings be changed to the following.
Wireless Name: HomeWiFi
Shared Key: CompTIA
Router Password: Secure$1
Finally, Laura wants to ensure that only her laptop and Smartphone can connect to the network.
Laptop: IP Address 192.168.1.100
Hardware Address: 00:0A:BF:03:C4:54
Smartphone: IP Address 192.168.1.101
Hardware Address: 09:2C:D0:22:3F:11
INSTRUCTIONS
Configure Laura's wireless network using the network adapter window.
If at any time you would like to bring back the initial state of the situation, please click the Reset All button.



Answer:

Explanation:


 

NEW QUESTION 46
......


CompTIA 220-1101 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Given a scenario, deploy and configure multifunction devices
  • printers and settings
  • Given a scenario, troubleshoot problems related to motherboards, RAM, CPU, and power
Topic 2
  • Summarize aspects of client-side virtualization
  • Given a scenario, install the appropriate RAM
  • Summarize cloud-computing concepts
Topic 3
  • Compare and contrast Internet connection types, network types, and their features
  • Compare and contrast the display components of mobile devices
Topic 4
  • Given a scenario, troubleshoot problems with wired and wireless networks
  • Explain basic cable types and their connectors, features, and purposes
Topic 5
  • Summarize services provided by networked hosts
  • Compare and contrast common networking hardware
Topic 6
  • Given a scenario, install and configure basic wired
  • wireless small office
  • home office (SOHO) networks
  • Given a scenario, troubleshoot and resolve printer issues
Topic 7
  • Compare and contrast common network configuration concepts
  • Given a scenario, apply the best practice methodology to resolve problems

 

220-1101 Certification Overview Latest 220-1101 PDF Dumps: https://www.newpassleader.com/CompTIA/220-1101-exam-preparation-materials.html

Free 220-1101 Exam Braindumps certification guide Q&A: https://drive.google.com/open?id=1jorgVN-obPX2_XQ2M-mCUmHJY0Mnfi0K