Best Quality Adobe AD0-E208 Exam Questions NewPassLeader Realistic Practice Exams [2023]
Critical Information To Adobe Analytics Business Practitioner Expert Pass the First Time
NEW QUESTION # 24
What column options can an analyst choose to manage data feeds?
- A. Report Suite, Destination Type, Destination Host and Interval
- B. Feed Name, Data Columns, Interval and Job history
- C. Feed Name, Data Dimensions, Start Date and End Date
Answer: A
Explanation:
Explanation
The column options that an analyst can choose to manage data feeds are Report Suite, Destination Type, Destination Host and Interval. These columns show information about each data feed configuration, such as which report suite it belongs to, what type of destination it uses (FTP or SFTP), what host name it connects to, and what interval it runs on (hourly or daily). Feed Name, Data Columns, Data Dimensions, Start Date and End Date are not column options for managing data feeds.
References: https://experienceleague.adobe.com/docs/analytics/export/data-feeds/data-feeds-ui.html?lang=en
https://experienceleague.adobe.com/docs/analytics/export/data-feeds/data-feeds-ui.html?lang=en#manage-data-f
NEW QUESTION # 25
In Analysis Workspace, which two types of components can be used in order to filter the scope of the report to a specific section of the website? (Choose two.)
- A. Time
- B. Segments
- C. Standard Metrics
- D. Dimensions
Answer: A,B
Explanation:
Explanation
In Analysis Workspace, segments and time are two types of components that can be used to filter the scope of the report to a specific section of the website. Segments are subsets of data based on certain criteria, such as page name, traffic source, device type, etc. Time is a component that allows you to specify a date range or granularity for your report. Dimensions and standard metrics are not components that can be used to filter the scope of the report, but rather to break down or measure the data.
References:
https://experienceleague.adobe.com/docs/analytics/components/segments/segments-overview.html?lang=en
https://experienceleague.adobe.com/docs/analytics/components/time/time-overview.html?lang=en
NEW QUESTION # 26
A user needs to share an important segment with a group of users in a Product Profile Group. Why can't a member of his Product Profile Group view the segment?
- A. The user only selected "Make this segment public-.
- B. The user forgot to select "Make this segment public".
- C. The user forgot to curate the Segment.
Answer: B
Explanation:
Explanation
The reason why a member of his Product Profile Group cannot view the segment is that the user forgot to select "Make this segment public". When a segment is created or edited, there is an option to make it public or private under the Share With section. If the segment is private, only the creator can use it. If the segment is public, it can be shared with all users, product profile groups, or individual users who have access to the same report suite. The user did not need to curate or duplicate the segment.
References:
https://experienceleague.adobe.com/docs/analytics/components/segments/segment-sharing.html?lang=en
https://experienceleague.adobe.com/docs/analytics/components/segments/segment-sharing.html?lang=en#sharing
NEW QUESTION # 27
When creating a calculated metric, how far back does the preview show data for?
- A. Last 90 days
- B. Can be selected by using the "Preview Date'' drop-down in the Calculated Metric Builder
- C. Last year
Answer: B
Explanation:
Explanation
When creating a calculated metric, the preview date range can be selected by using the "Preview Date" drop-down in the Calculated Metric Builder. This will allow you to see how your calculated metric performs for different periods of time, such as last week, last month, last quarter, etc.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/calculated-metrics/calculated-me
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/calculated-metrics/calculated-me
NEW QUESTION # 28
Refer to the exhibit:
A marketing analyst wants to look into visitors who originated from paid search and made a purchase.
Which two options can be done directly from this Visualization? (Choose two.)
- A. Right click to create a new segment from the overlap region of the Venn Visualization.
- B. Right click to create a segment from one side of the Venn Visualization.
- C. Transform the Venn diagram into a Freeform Table by clicking on the managed data source colored dot next to the Venn header.
- D. Drag a third segment onto the Venn Visualization to see how it relates to the other two.
Answer: A,D
Explanation:
Explanation
A Venn Visualization is a tool that shows how segments overlap or differ from each other. It can also support up to three segments in one visualization. Two options that can be done directly from this Visualization are:
Drag a third segment onto the Venn Visualization to see how it relates to the other two. This will show how the third segment intersects or excludes the other two segments in different regions. Right click to create a new segment from the overlap region of the Venn Visualization. This will create a new segment based on the criteria that match both segments in the overlap region.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/venn.html?lang=en
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/venn.html?lang=en
NEW QUESTION # 29
The analytics team has created an Analysis Workspace project featuring a Freeform Table and a Flow Visualization in one Panel.
Why is the scheduled report just showing the Panel Name?
- A. The Freeform Table and Flow Visualization in the Panel were minimized.
- B. The Freeform Table and Flow Visualization were expanded.
- C. The Project was never curated.
Answer: A
Explanation:
Explanation
When scheduling a report from an Analysis Workspace project, only the expanded visualizations in each panel will be included in the report. If the Freeform Table and Flow Visualization in the Panel were minimized, they will not show up in the scheduled report, only the Panel Name will.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/share/schedule-project.html?lang
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/share/schedule-project.html?lang
NEW QUESTION # 30
The conversion percentage from one step to another in a Fallout Visualization is 104%. What could be the reason the percentage is over 100%?
- A. The success event can be fired outside of the specified funnel order.
- B. Another report suite's data is polluting the funnel.
- C. Success events cannot be added to a funnel.
Answer: A
Explanation:
Explanation
The Fallout visualization can show a conversion percentage over 100% if the success event can be fired outside of the specified funnel order. For example, if a visitor completes a purchase before viewing a product, the purchase event will still be counted in the fallout even though it happened before the product view event.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/fallout.html?lang=
NEW QUESTION # 31
In the Solution Design Reference document, variable 'Product Category" is assigned to "eVar4" and is set on a product page with value "Shoes". It is then not recorded in the shopping cart page, the "Order summary" page, or the "Order completion" pages.
The variable is configured like this:
If we count the number of orders per product category in a report, which value receives one order after one visitor completes a purchase from that Product page?
- A. Order completion
- B. Shoes
- C. None
Answer: B
Explanation:
Explanation
Since eVar4 is set to expire after purchase event, the value "Shoes" will be persisted throughout the visit until the order is completed. Therefore, the report will show one order for product category "Shoes".
References:
https://experienceleague.adobe.com/docs/analytics/components/variables/conversion-variables/conversion-var-ov
NEW QUESTION # 32
Several end users have complained that Analysis Workspace is too cluttered with infrequently used variables.
How would the Report Suite Admin Console be used to improve their user experience?
- A. Suggest the team use Customize Menus
- B. Suggest the team use Data Feeds
- C. Suggest the team use Data Warehouse
Answer: A
Explanation:
Explanation
The best way to improve the user experience of Analysis Workspace for end users who complain that it is too cluttered with infrequently used variables is to suggest the team use Customize Menus. Customize Menus is a feature that allows users to hide or show dimensions, metrics, segments, or date ranges in Analysis Workspace based on their preferences. This can help reduce clutter and improve efficiency. Suggesting the teamuse Data Feeds or Data Warehouse will not help with this issue, as they are different tools that are used for exporting or importing data.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/customize-menus.html?lang=en
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/customize-menus.html?lang=en#
NEW QUESTION # 33
Refer to the exhibit.
Analyzing results from multinational e-commerce, a data analyst realizes much of the product view results and orders are being mapped to an "Unspecified" department name.
What is the probable cause?
- A. Product Department is a classification of product data. These products are not correctly updated or defined in classifications.
- B. Not all products will have a defined name and department. The "Unspecified" is an expected behavior.
- C. Product View is not the proper metric for Product Department, thus causing the appearance of
"Unspecified".
Answer: A
Explanation:
Explanation
Product Department is a classification of product data that can be used to group products into meaningful categories. If some products are showing up as "Unspecified"in the report, it means that they are not correctly classified or updated in the classification file.
References:
https://experienceleague.adobe.com/docs/analytics/components/classifications/classifications-overview.html?lan
NEW QUESTION # 34
In Analysis Workspace, what are two ways a Map Visualization can be built? (Choose two.)
- A. Using IP address or Latitude/Longitude
- B. Building a Map Visualization using two or more metrics (including calculated metrics)
- C. Representing geo segmentation data about visitor location on the DMA or Zip Code level
- D. Building a Map Visualization using one metric (including calculated metrics)
Answer: C,D
Explanation:
Explanation
A Map Visualization can be built by representing geo segmentation data about visitor location on the DMA or Zip Code level, which are two dimensions that can be used in a map. Alternatively, a Map Visualization can be built by using one metric (including calculated metrics) that can be applied to any dimension that has geographic data associated with it, such as country or region.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/map.html?lang=en
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/map.html?lang=en
NEW QUESTION # 35
Which option would an analyst choose to show the percentage change between the two numbers in a visualization?
- A. Use the Summary Change visualization, click the Visualization settings, and select Show Percent ,#l Change
- B. Use the Summary Number visualization, click the Visualization settings, and select Percentages
- C. Use the Summary Change visualization from a Freeform Table, click the Visualization settings, and O select Show Raw Difference
Answer: A
Explanation:
Explanation
The Summary Change visualization shows the difference between two numbers in a report, such as current period vs previous period. To show the percentage changebetween the two numbers, you need to click the Visualization settings and select Show Percent Change.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/summary-change.h
NEW QUESTION # 36
A bank client wants to understand usage of their mobile website by geographical region. The analytics team is tasked with creating segments to provide this data.
Why would the analytics team decide to use segment stacking in the Segment Builder?
- A. It bypasses the limit on the number of segments per report.
- B. It breaks a consolidated segment down into multiple granular segments.
- C. It provides the ability to consolidate more granular segments into one combined segment.
Answer: C
Explanation:
Explanation
Segment stacking is a feature that allows you to combine multiple segments into one by using containers within containers. It provides the ability to consolidate more granular segments into one combined segment, which can help simplify complex segment logic or reuse existing segments. It does not break a consolidated segment down into multiple granular segments, nor does it bypass the limit on the number of segments per report.
References:
https://experienceleague.adobe.com/docs/analytics/components/segments/segment-stacking.html?lang=en
https://experienceleague.adobe.com/docs/analytics/components/segments/segment-stacking.html?lang=en#segm
NEW QUESTION # 37
An analyst wants to use all of the following variables to configure a single fallout report:
* Landing page prop
* Marketing channel eVar
* Product view event
* Purchase event
* Product category eVar
Which tool should the analyst use?
- A. Segment builder
- B. Workspace
- C. Reports and analysis
Answer: B
Explanation:
Explanation
Workspace is a tool that allows you to create interactive and customizable reports using various visualizations and components. It can also support multiple variables in a single fallout report, unlike segment builder or reports and analysis.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/analysis-workspace.html?lang=e
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/fallout.html?lang=
NEW QUESTION # 38
A key is matched to multiple rules and it sets the same classification column shown in the Set Classification column.
How can a user control the order?
- A. Rank the most important rule last in the rule set.
- B. Rank the most important first in the rule set.
- C. Rank both rules using Linear in the rule set.
Answer: A
Explanation:
Explanation
If a key is matched to multiple rules and it sets the same classification column, the user can control the order by ranking the most important rule last in the rule set. This is because classification rules are applied from bottom to top, so the last rule that matches a key will overwrite any previous rules that also matched the same key. Ranking the most important rule first or using linear ranking will not work, as they will not ensure that the most important rule takes precedence over the others.
References:
https://experienceleague.adobe.com/docs/analytics/components/classifications/classifications-ruleset.html?lang=
https://experienceleague.adobe.com/docs/analytics/components/classifications/classifications-ruleset.html?lang=
NEW QUESTION # 39
When a segment is created from within a report by dragging a component on the segment area, is it possible to re-use it in another report?
** change report to Workspace **
- A. Yes, by editing the segment and checking "Make this segment public".
- B. Yes, by editing the segment and checking Make this an Experience Cloud audience".
- C. Yes, it is automatically available in the segments list.
Answer: A
Explanation:
Explanation
When a segment is created from within a Workspace by dragging a component on the segment area, it is initially saved as a private segment that can only be used by the creator. However, it is possible to re-use it in another Workspace by editing the segment and checking "Make this segment public". This will make the segment available to other users who have access to the same report suite.
References:
https://experienceleague.adobe.com/docs/analytics/components/segments/create-segments-in-analysis-workspace
https://experienceleague.adobe.com/docs/analytics/components/segments/create-segments-in-analysis-workspace
NEW QUESTION # 40
A spike in traffic is observed for a specific day. Knowing that there are no campaigns running, the first hypothesis is that this is bot traffic.
Which Adobe Analytics tool may be used to identify the IP of the user that contributes to this spike in traffic without using a custom variable?
- A. Analysis Workspace
- B. Anomaly Detection
- C. Data Warehouse
Answer: C
Explanation:
Explanation
Data Warehouse is a tool that allows you to run custom queries on raw data and export the results to various formats. It can also provide the IP address of the user as a dimension, which can help identify bot traffic without using a custom variable.
References:
https://experienceleague.adobe.com/docs/analytics/export/data-warehouse/data-warehouse.html?lang=en
https://experienceleague.adobe.com/docs/analytics/components/dimensions/ip-address.html?lang=en
NEW QUESTION # 41
Which is a benefit of using a Virtual Report Suite?
- A. It provides the ability to freely customize variable allocation settings and variable names per Virtual Report Suite.
- B. Real-time reporting allows users to respond to trends within minutes of data collection.
- C. Business users in your organization always see only the segmented data that is relevant to them.
Answer: C
Explanation:
Explanation
A Virtual Report Suite is a subset of data from an existing report suite that is based on a segment. It allows business users to see only the data that is relevant to them without affecting the original report suite data. It does not provide the ability to customize variable settings or names per Virtual Report Suite, nor does it enable real-time reporting.
References:
https://experienceleague.adobe.com/docs/analytics/components/virtual-report-suites/vrs-overview.html?lang=en
https://experienceleague.adobe.com/docs/analytics/components/virtual-report-suites/vrs-faq.html?lang=en
NEW QUESTION # 42
The Chief Marketing Officer has established a monthly revenue target for an online store and wants to see how revenue for the current month is tracking towards that goal.
Which Visualization should be used for this report?
- A. Scatter
- B. Treemap
- C. Bullet
Answer: C
Explanation:
Explanation
A Bullet Visualization is a tool that shows how a metric is performing against a target or goal. It can help monitor progress and identify gaps or opportunities. It can also show additional information, such as comparison periods or ranges.
References:
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/bullet.html?lang=e
https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/bullet.html?lang=e
NEW QUESTION # 43
......
AD0-E208 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.newpassleader.com/Adobe/AD0-E208-exam-preparation-materials.html
Best Quality Adobe AD0-E208 Exam Questions: https://drive.google.com/open?id=1Ro7BPMntoK-WVArm70cUluA5_WMNvZDb