NS0-173 Updated Exam Dumps [2022] Practice Valid Exam Dumps Question
NS0-173 Sample with Accurate & Updated Questions
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 33
Which two Unified Computing System capabilities are required to achieve stateless computing? (Choose two.)
- A. service profiles
- B. templates
- C. boot from SAN
- D. blade servers
Answer: A,D
Explanation:
Cisco introduced the idea of stateless computing with its blade server design.
A Cisco UCS instance allows you to quickly align computing resources in the data center with rapidly changing business requirements. This built-in flexibility is determined by whether you choose to fully implement the stateless computing feature.
Pools of servers and other system resources can be applied as necessary to respond to workload fluctuations, support new applications, scale existing software and business services, and accommodate both scheduled and unscheduled downtime. Server identity can be abstracted into a mobile service profile that can be moved from server to server with minimal downtime and no need for additional network configuration.
NEW QUESTION 34
A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)
- A. FC portsets
- B. ALUA settings
- C. MTU configuration
- D. FC zoning
- E. igroup configuration
Answer: A,C,E
NEW QUESTION 35
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 3
- B. LUN 0
- C. LUN 1
Section: (none)
Explanation - D. LUN 2
Answer: B
NEW QUESTION 36
A customer is investigating options for implementing a FlexPod Datacenter solution that is using vSphere 6.x.
In this scenario, which two resources would be important to review? (Choose two.)
- A. NetApp Technical Report
- B. Cisco Validated Design documents
- C. Cisco Cloud Center documentation
- D. VMware vSAN documentation
Answer: A,B
NEW QUESTION 37
A customer wants to deploy FlexPod for a VDI solution with 10,000 users, each with 10 GB of storage allocated.
To support this configuration, which three components must be sized? (Choose three.)
- A. the 1GbE ports from user systems
- B. the Cisco UCS servers
- C. the fabric interconnect ports
- D. the optical cable length
- E. the NetApp AFF storage
Answer: A,B,C
NEW QUESTION 38
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. RDP
- B. Telnet
- C. SSH
- D. SAML
Answer: B,C
NEW QUESTION 39
Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects?
- A. server ports
- B. Ethernet uplink ports
- C. FC storage ports
- D. appliance ports
Answer: C
NEW QUESTION 40
A customer is using a FlexPod implementation that has 10 Gbps uplinks from the B-Series chassis to the fabric interconnect. The customer wants to upgrade the links to 40 Gbps.
In this scenario, which model of Cisco UCS server IOM is required?
- A. 0
- B. 2204XP.
- C. 2208XP
- D. 1
Answer: B
Explanation:
The Cisco UCS 2204XP Fabric Extender (Figure 7) has four 10 Gigabit Ethernet, FCoE-capable, SFP+ ports that connect the blade chassis to the fabric interconnect.
NEW QUESTION 41
Click the Exhibit button.
You have designed a FlexPod Express solution that uses a NetApp ONTAP controller, Cisco UCS C-Series servers, and Cisco Nexus 3000 Series switches, as shown in the exhibit. Which three storage protocols are supported in this design? (Choose three.)
- A. NFS
- B. FC
- C. iSCSI
- D. SMB
- E. FCoE
Answer: A,B,C
NEW QUESTION 42
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. EIGRP
- B. STP
- C. vPC
- D. VXLAN
Answer: D
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 43
A client has a requirement to set up a FlexPod Datacenter with the NetApp fabric MetroCluster architecture. You want to enable connectivity between the deployments.
In this design, which two components are required to accomplish this task? (Choose two.)
- A. Cisco Nexus 9000 switches
- B. Cisco Nexus 3000 switches
- C. Cisco Nexus 7000 switches
- D. Cisco MDS 9300 switches
Answer: A,C
NEW QUESTION 44
A customer has several existing standalone Cisco UCS C-Series servers that they would like to repurpose and add to their FlexPod Datacenter solution.
Which action should the customer perform on these servers before using UCS Manager?
- A. Reboot the CIMC on each server.
- B. Remove the hard disks on each server.
- C. Zero-out the FlexFlash cards on each server.
- D. Reset the CIMC to the factory settings on each server.
Answer: D
Explanation:
On rare occasions, such as an issue with the current running firmware, troubleshooting a server may require you to reset the CIMC to the factory default. When this happens, all user-configurable settings are reset. This procedure is not part of the normal server maintenance. After you reset the CIMC, you are logged off and must log in again. You may also lose connectivity and may need to reconfigure the network settings.
NEW QUESTION 45
When FCoE is configured in a FlexPod environment, which step is required?
- A. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.
- B. Create a VSAN within service profiles.
- C. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.
- D. Create a VSAN to support FCoE for the FC uplink.
Answer: C
NEW QUESTION 46
You are designing a FlexPod solution that requires 32 ports running at 40 Gbps.
To satisfy this requirement, which Cisco Fabric Interconnect should you deploy?
- A. 0
- B. 6332-16UP
- C. 6296UP
- D. 6248UP
Answer: A
Explanation:
FI 6332 is a one-rack-unit (1RU) 40 Gigabit Ethernet, and FCoE switch offering up to 2.56 Tbps throughput and up to 32 ports. The switch has 32 40Gbps fixed Ethernet.
NEW QUESTION 47
You are asked to design a FlexPod solution with a Cisco UCS B-Series chassis. There is no requirement for any Cisco UCS C-Series rack servers. You must ensure that there is a minimum of a 2500 VLAN or VSAN capacity per UCS domain.
In this scenario, which Cisco Fabric Interconnects do you select?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 48
A customer has ordered a FlexPod Select solution with a NetApp EF570.
In this scenario, which three storage protocols are available for use? (Choose three.)
- A. iSCSI
- B. InfiniBand
- C. NFS
- D. FC
- E. CIFS
Answer: C,D,E
NEW QUESTION 49
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. one
- B. four
- C. two
- D. three
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 50
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?
- A. access mode
- B. trunk mode
- C. end host mode
- D. switching mode
Answer: D
NEW QUESTION 51
Which command would a FlexPod administrator use to determine whether an FC initiator has logged on to the fabric?
- A. MDS9148>show fcfwd
- B. MDS9148>show fcc
- C. MDS9148>show fcdomain
- D. MDS9148>show flogi database
Answer: D
NEW QUESTION 52
A customer has verified physical connectivity on the FlexPod. However, the LUNs are not available on the Cisco UCS server. To make the LUNs visible to the UCS, the customer must enable a switching feature for zoning.
In this scenario, what should the customer do?
- A. Enable the device connector feature in Cisco UCS Manager.
- B. Enable Spine mode on all the Cisco Nexus 9000 switches.
- C. Enable NPV on all switches.
- D. Enable NPIV on all switches.
Answer: A
NEW QUESTION 53
Click the Exhibit button.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)
- A. I.
- B. IV
- C. II.
- D. III.
Answer: B,D
NEW QUESTION 54
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?
- A. Nexus 9000
- B. Nexus 3000
- C. Nexus 7000
- D. Nexus 5000
Answer: A
NEW QUESTION 55
......
Pass Network Appliance NS0-173 Premium Files Test Engine pdf - Free Dumps Collection: https://www.newpassleader.com/NetworkAppliance/NS0-173-exam-preparation-materials.html