[Nov 19, 2021] NCM-MCI-5.15 Exam Dumps 100% Same Q&A In Your Real Exam
NCM-MCI-5.15 Test Engine Dumps Training With 108 Questions
NEW QUESTION 45
An organizations Nutanix Cluster is based on VMware vSphere. The cluster is configured to download software updates automatically. The administration needs to verify and eventually upgrade VMware hypervisor via Prism Ul.
After logging in to Prism, the administrator receives the message shown:
No available versions for upgrade
What is causing the current state?
- A. vSphere binaries need to be manually uploaded.
- B. The cluster is unable to connect to reIease-api.nutanix-ccm:8D.
- C. VMware support has expired, so downloads are not available.
- D. The environment is running the latest vSphere version, so no update is required.
Answer: D
Explanation:
Explanation
ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v510:upg-hypervisor-up
NEW QUESTION 46
An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
* Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?
- A. Flash Mode
- B. Inline Compression
- C. Post-Process Compression
- D. Cache Dedup
Answer: B
NEW QUESTION 47
The networking team makes changes to the Top of Rack switches to which the Nutanix cluster are attached.
A few VMs are able to communicate with each other on the same node but are unable to connect to other parts of the network.
What is the likely cause of this issue?
- A. There is a VLAN misconfiguration on the switch.
- B. The vNIC port is disconnected on the affected VMs.
- C. Jumbo Frame are misconfigured across ports.
- D. There is a VLAN misconfiguration on the VMs.
Answer: A
NEW QUESTION 48
A VDI environment based on AHV Cluster is not performing well. The current environment is using only one bridge (Bridge0). The administrator needs to verify if nodes are using all network cards associated to Bridge0.
Which two menus should be used to check the current configuration? (Choose two.)
- A. Host view in Network menu
- B. Network Configuration item in Settings menu
- C. Host NICs tab in Hardware menu
- D. I/O Metrics tab in VM menu
Answer: A,C
NEW QUESTION 49
An alert about RX errors on eth2 on a node is reported in the cluster. The administrator logs in to the CVM in question, checks the ping_* files in the data/logs/syststats folder, and notices intermittent ping loss.
The node in question has the following network configuration:
Which action should be used to troubleshoot without disrupting the VMs running on this node?
- A. Replace the cable from eth2 to the switch
- B. Check the port on the switch side for any errors
- C. Enable balance-s1b on br0-up and monitor if a problem persists
- D. Remove eth3 from br0-up and monitor for new alerts
Answer: B
NEW QUESTION 50
An organization is running a Nutanix Cluster based on AOS 5.10.x and VMware vSphere 6.7. Currently, the CVM network is segmented and Storage only nodes not present.
A new security project based on NSX is coming. VMware Distributed Virtual Switches are required. The administrator needs to prepare the environment for the new project.
Which step should the administrator use to initiate the project?
- A. Enable Nutanix Flow at the Prism Central Level
- B. Convert storage only nodes into vSphere nodes
- C. Enable Jumbo Frames to accommodate network frames
- D. Manually disable CVM network Segmentation
Answer: C
NEW QUESTION 51
Refer to the exhibit.
An administrator logged into Prism Element, notices the following in the home dashboard, and showing the exhibit.
Which action should the administrator take next?
- A. Re-run NCC specifying data_resiliency_check
- B. Check the hardware page for disk failures
- C. Configure the fqdn for the hosts indicated
- D. Troubleshoot the zookeeper server issue
Answer: A
NEW QUESTION 52
While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.
What type of Policy Enforcement must the administrator choose?
- A. Hard
- B. Soft
- C. External
- D. Internal
Answer: B
Explanation:
NEW QUESTION 53
Refer to the exhibit.
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?
- A. Change the network the VMs are connected to
- B. Update the switch to specifically allow VLAN 15
- C. Change the spanning-tree port type on the switch
- D. The VMs need to have static IP addresses
Answer: B
Explanation:
Explanation
Ref: https://hyperhci.com/2019/11/09/nutanix-ahv-enable-vlan-trunk-mode-on-guest-vm/
NEW QUESTION 54
An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicate with only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?
- A. Configure bond0 as balance-lacp
- B. Configure bond0 as active-backup
- C. Configure bond0 as balance-tcp
- D. Configure bond0 as balance-sib
Answer: D
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_netw
NEW QUESTION 55
A three-node cluster has a Nutanix Files instance with three FSVMs.
What happens after a node failure?
- A. The affected FSVM will be restarted on another node.
- B. The affected FSVM will get live-migrated to another node.
- C. The affected FSVM will not be restarted on another node due to its VM-to-VM anti-affinity settings.
- D. The affected FSVM will not be restarted on another node due to its agent VM setting.
Answer: A
Explanation:
Explanation
Ref: https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-files-high-availability-c.html
NEW QUESTION 56
An administrator configures authentication in Prism Central (PC) for the NTNX-Admins group. Users report that they are unable to log in. The administrator confirms that the Active Directory (AD) settings in PC are correct.
Which condition could result in this behavior?
- A. The users must be added to the Domain Admins AD group.
- B. A role mapping needs to be associated with the AD group.
- C. The Local authentication type must also be selected in PC.
- D. A client chap certificate must also be added in PC.
Answer: A
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-security-ro
NEW QUESTION 57
An administrator needs to replace the self-signed certificate on a cluster. Which two requirements must be met as part of the process? (Choose two.)
- A. The imported files for the custom certificate must be PEM encoded.
- B. The existing certificate must be deleted prior to replacement.
- C. The signed, intermediate and root certificates are chained.
- D. The cluster administrator must restart the interface gateway.
Answer: A,C
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v55:mul-security-ssl-c
NEW QUESTION 58
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic, regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?
- A. An Application Security Policy
- B. An Isolation Environment Policy
- C. A Whitehst-Based Policy
- D. A Quarantine Policy
Answer: B
Explanation:
NEW QUESTION 59
An administrator deletes a large amount of data from a Volume Group presented to a Linux VM. The administrator notices that the deleted data has not been reclaimed as usable storage.
What action should be taken to reclaim the storage capacity?
- A. Unmount the Volume Group and then Remount the Volume Group
- B. Run Defrag on the Linux VM
- C. Shrink the Volume Group that is associated with the Linux VM
- D. Enable the unman operation on the Linux VM
Answer: A
Explanation:
Explanation
https://next.nutanix.com/how-it-works-22/vm-capacity-and-prism-capacity-are-different-33134
NEW QUESTION 60
An administrator is currently using both 10g uplink with LACP and balance-tcp. A single VM should not be allowed to use more than a single 10G uplink, and both uplinks should be utilized.
Which two command should be used to configure the bond? (choose two)
- A. Ovs-vsctl set port br0-up bond_mode=balance-tcp
- B. Ovs-vsctl set port br0-up bond_mode=balance-slb
- C. Ovs-vsctl set port br0-up bond_mode=active-backup
- D. Ovs-vsctl set port br0-up other_config: bond-rebalance-interval=30000
Answer: B,D
NEW QUESTION 61
An administrator has a 32-node hybrid cluster with CPU, RAM and storage utilization of 80%. A database VM is configured with VM Flash.
What is causing this IO latency?
- A. Database VM is experiencing high CPU ready time.
- B. VM Flash Mode reduces SSD tier capacity for VMs.
- C. Curator scans causes by ILM constantly moving data.
- D. Controller VM is experiencing high CPU ready time.
Answer: D
NEW QUESTION 62
......
Nutanix NCM-MCI-5.15 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NCM-MCI-5.15 Practice Test Pdf Exam Material: https://www.newpassleader.com/Nutanix/NCM-MCI-5.15-exam-preparation-materials.html