[Mar 01, 2023] Dumps Collection JN0-636 Test Engine Dumps Training With 94 Questions
Juniper JN0-636 Dumps - 100% Cover Real Exam Questions
NEW QUESTION 13
You are asked to provide single sign-on (SSO) to Juniper ATP Cloud. Which two steps accomplish this goal?
(Choose two.)
- A. Configure Juniper ATP Cloud as the identity provider (IdP).
- B. Configure Juniper ATP Cloud as the service provider (SP).
- C. Configure Microsoft Azure as the identity provider (IdP).
- D. Configure Microsoft Azure as the service provider (SP).
Answer: C,D
NEW QUESTION 14
In Juniper ATP Cloud, what are two different actions available in a threat prevention policy to deal with an infected host? (Choose two.)
- A. Drop the connection silently.
- B. Close the connection.
- C. Send a custom message
- D. Quarantine the host.
Answer: A,D
NEW QUESTION 15
Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user's access rights.
What would you use to assist your SRX series devices to accomplish this task?
- A. JSA
- B. Junos Space
- C. JATP Appliance
- D. JIMS
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth-configure-jims.html
NEW QUESTION 16
Exhibit
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet is part of an existing session.
- B. The packet is silently discarded.
- C. The packet is explicitly rejected.
- D. The packet is part of a new session.
Answer: C,D
NEW QUESTION 17
Which two modes are supported on Juniper ATP Cloud? (Choose two.)
- A. transparent mode
- B. Layer 3 mode
- C. private mode
- D. global mode
Answer: A,B
NEW QUESTION 18
You must implement an IPsec VPN on an SRX Series device using PKI certificates for authentication. As part of the implementation, you are required to ensure that the certificate submission, renewal, and retrieval processes are handled automatically from the certificate authority.
In this scenario, which statement is correct.
- A. You can use OCSP to accomplish this behavior.
- B. You can use SCEP to accomplish this behavior.
- C. You can use CRL to accomplish this behavior.
- D. You can use SPKI to accomplish this behavior.
Answer: B
Explanation:
Certificate Renewal The renewal of certificates is much the same as initial certificate enrollment except you are just replacing an old certificate (about to expire) on the VPN device with a new certificate. As with the initial certificate request, only manual renewal is supported. SCEP can be used to re-enroll local certificates automatically before they expire. Refer to Appendix D for more details.
NEW QUESTION 19
Exhibit
You are using traceoptions to verity NAT session information on your SRX Series device Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This packet is part of an existing session.
- B. The SRX device is changing the destination address on this packet 10.0.1 1 to 172 20.101.10.
- C. This is the first packet in the session
- D. The SRX device is changing the source address on this packet from
Answer: B,C
NEW QUESTION 20
Regarding IPsec CoS-based VPNs, what is the number of IPsec SAs associated with a peer based upon?
- A. The number of forwarding classes configured for the VPN.
- B. The number of classifiers configured for the VPN.
- C. The number of CoS queues configured for the VPN.
- D. The number of traffic selectors configured for the VPN.
Answer: D
NEW QUESTION 21
You want to use selective stateless packet-based forwarding based on the source address.
In this scenario, which command will allow traffic to bypass the SRX Series device flow daemon?
- A. set firewall family inet filter bypass_flowd term t1 then routing-instance stateless
- B. set firewall family inet filter bypass__f lowd term t1 then packet-mode
- C. set firewall family inet filter bypaa3_flowd term t1 then skip-services accept
- D. set firewall family inet filter bypas3_flowd term t1 then virtual-channel stateless
Answer: C
NEW QUESTION 22
Exhibit
Your company recently acquired a competitor. You want to use using the same IPv4 address space as your company.
Referring to the exhibit, which two actions solve this problem? (Choose two)
- A. Identify two neutral IPv4 address spaces for address translation.
- B. Connect the competitor network using IPsec policy-based VPNs.
- C. Configure IPsec Transport mode.
- D. Configure static NAT on the SRX Series devices.
Answer: B,D
NEW QUESTION 23
Exhibit
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain However, the traffic between two hosts in the same broadcast domain are not matching any security policies Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to security bridging mode
- B. You must change the global mode to switching mode.
- C. You must change the global mode to transparent bridge mode.
- D. You must change the global mode to security switching mode.
Answer: A
NEW QUESTION 24
You are asked to allocate security profile resources to the interconnect logical system for it to work properly.
In this scenario, which statement is correct?
- A. The flow-session resource must be defined in the security profile for the interconnect logical system.
- B. The NAT resources must be defined in the security profile for the interconnect logical system.
- C. No resources are needed to be allocated to the interconnect logical system.
- D. The resources must be calculated based on the amount of traffic that will flow between the logical systems.
Answer: D
NEW QUESTION 25
Exhibit.
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A. [edit security ike gateway advpn-gateway]
user@srx# set advpn suggester disable - B. [edit security ike gateway advpn-gateway]
user@srx# set version v1-only - C. [edit interfaces]
user@srx# delete st0.0 multipoint - D. [edit security ike gateway advpn-gateway]
user@srx# delete advpn partner
Answer: A,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery-vpns.html
NEW QUESTION 26
SRX Series device enrollment with Policy Enforcer fails To debug further, the user issues the following commandshow configuration services security-intelligence url
https : //cloudfeeds . argon . juniperaecurity . net/api/manifeat. xml
and receives the following output:
What is the problem in this scenario?
- A. The device is already enrolled with Policy Enforcer.
- B. The SRX Series device does not have a valid license.
- C. Junos Space does not have matching schema based on the
- D. The device is directly enrolled with Juniper ATP Cloud.
Answer: B
NEW QUESTION 27
Exhibit
The exhibit shows a snippet of a security flow trace.
In this scenario, which two statements are correct? (Choose two.)
- A. Destination NAT occurs.
- B. An existing session is found in the table.
- C. The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.
- D. This packet arrived on interface ge-0/0/4.0.
Answer: B,C
NEW QUESTION 28
You are asked to detect domain generation algorithms
Which two steps will accomplish this goal on an SRX Series firewall? (Choose two.)
- A. Attach the security-metadata-streaming policy to a security
- B. Define an advanced-anti-malware policy under [edit services].
- C. Attach the advanced-anti-malware policy to a security policy.
- D. Define a security-metadata-streaming policy under [edit
Answer: B,C
NEW QUESTION 29
Which statement is true about persistent NAT types?
- A. The target-host-port parameter cannot be used with IPv6 addresses in NAT64
- B. The target-host parameter cannot be used with IPv4 addresses inNAT46
- C. The target-host-port parameter cannot be used with IPv4 addresses in NAT46.
- D. The target-host parameter cannot be used with IPv6 addressee in NAT64.
Answer: B
NEW QUESTION 30
Exhibit
Referring to the exhibit, which type of NAT is being performed?
- A. Persistent NAT
- B. Static NAT
- C. Source NAT
- D. Destination NAT
Answer: C
NEW QUESTION 31
Exhibit
An administrator wants to configure an SRX Series device to log binary security events for tenant systems.
Referring to the exhibit, which statement would complete the configuration?
- A. Configure the tenant as master for the pi security profile.
- B. Configure the tenant as TSYS1 for the pi security profile.
- C. Configure the tenant as root for the pi security profile.
- D. Configure the tenant as local for the pi security profile
Answer: C
NEW QUESTION 32
Exhibit
You are using traceoptions to verify NAT session information on your SRX Series device. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This is the first packet in the session.
- B. The SRX Series device is performing only source NAT on this session.
- C. The SRX Series device is performing both source and destination NAT on this session.
- D. This is the last packet in the session.
Answer: C,D
NEW QUESTION 33
Exhibit
You have recently configured Adaptive Threat Profiling and notice 20 IP address entries in the monitoring section of the Juniper ATP Cloud portal that do not match the number of entries locally on the SRX Series device, as shown in the exhibit.
What is the correct action to solve this problem on the SRX device?
- A. Flush the DNS cache on the SRX device.
- B. Force a manual download of the Proxy__Nodes feed.
- C. Refresh the feed in ATP Cloud.
- D. You must configure the DAE in a security policy on the SRX device.
Answer: A
NEW QUESTION 34
......
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Realistic NewPassLeader JN0-636 Dumps PDF - 100% Passing Guarantee: https://www.newpassleader.com/Juniper/JN0-636-exam-preparation-materials.html
Real JN0-636 dumps - Real Juniper dumps PDF: https://drive.google.com/open?id=1hrKhNfogaXzaaVWkB3WHohgWznFNEphQ