Free 300-625 Braindumps Download Updated on Nov 25, 2021 with 72 Questions
Cisco 300-625 Exam Practice Test Questions
Exam Content to Explore
Each candidate has 90 minutes to write the Cisco 300-625 exam, which is only available in English and includes multiple-choice questions. There will be 60 items in total and you will need to earn at least 825 points to clear the test with flying colors. If you are ready to continue on the path of the Cisco certification, you can refer to the Pearson VUE website to schedule the exam date.
NEW QUESTION 17
The principal switch on a Fibre Channel network fails to assign requested domain to a subordinate switch. What are two reasons? (Choose two.)
- A. The requested domain is outside the allowed list.
- B. The fabric is locked.
- C. The persistent FC ID feature is not enabled.
- D. Cisco Fabric Services distribution is not enabled on the switch.
- E. An existing switch already has the requested domain assigned.
Answer: A,E
NEW QUESTION 18
Which SAN port type should you use on an NPIV core switch that connects to an NPV edge switch?
- A. TE
- B. E
- C. N
- D. F
- E. FL
Answer: D
NEW QUESTION 19
Which two steps are mutual between Cisco secure boot and UEFI secure boot? (Choose two.)
- A. operating system
- B. hardware anchor
- C. bootloader
- D. microloader
- E. kernel
Answer: A,C
NEW QUESTION 20
Which configuration is always required when running the setup utility on a Cisco MDS 9000 Series Switch?
- A. management IP address
- B. administrator password
- C. active NTP server
- D. active default gateway
Answer: B
Explanation:
Section: Implementation
NEW QUESTION 21
Refer to the exhibit.
Device alias information must be merged for two fabrics. Which setting must match on both fabrics before the merge can be performed successfully?
- A. qos
- B. session
- C. device-alias mode
- D. smart-zoning
Answer: C
NEW QUESTION 22
Refer to the exhibit. A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch.
Which action is required for the configuration to give permission to the new colleague?
- A. permit vsan 1-1000 must be configured as rule 5.
- B. permit vsan 1-1000 must be configured as rule 1.
- C. permit vsan 1-1000 must be configured under the VSAN policy deny.
- D. permit vsan 1-1000 must be configured under the VSAN policy allow.
Answer: C
NEW QUESTION 23
Refer to the exhibit.
Refer to the exhibit. The san-user must configure FSPF on the VSAN 500. but fails. An operator with network administrative rights must authorize the san-user to perform this work. Which configuration must the operator apply?
- A. MDS-A(config)# role name sangroup
MDS-A(config-role># no rule 2 - B. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan - C. MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500 - D. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf
Answer: B
NEW QUESTION 24
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?
- A. name server
- B. time server
- C. fabric controller
- D. management server
Answer: A
NEW QUESTION 25
Drag and drop the FLOGI parameters from the left onto the descriptions from which they were derived on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_2/npv.html
NEW QUESTION 26
Which statement accurately describes the result of disabling restrictions on oversubscription ratios on Cisco MDS 9000 Series Fibre Channel switching modules?
- A. The bandwidth allocation of the shared ports is equal to the lowest configured bandwidth.
- B. A port-group can contain a single port only.
- C. The bandwidth allocated to shared ports is proportionate to the configured speed of the ports.
- D. QoS can be configured.
Answer: C
NEW QUESTION 27
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?
- A. NX-OS
- B. BASH
- C. BIOS
- D. ROMMON
Answer: A
NEW QUESTION 28
Refer to the exhibit.
Refer to the exhibit. A network engineer must configure the SAN telemetry streaming feature to stream statistics from a Cisco MDS 9000 Series Switch to two external receivers with the IP addresses 192.168.1.4 and 192.168.1.5. Which two configurations accomplish this configuration? (Choose two)
- A. Add IP address 192.168.1.5 port 50005 protocol gRPC encoding GPB under destination-group 300.
- B. Add dst grp 300 under subscription 200.
- C. Add dst-grp 200 under subscription 100.
- D. Add IP address 192.168.1.5 port 50005 protocol gRPC encoding GPB under destination-group 100.
- E. Add dst-grp 100 under subscription 200.
Answer: C,E
NEW QUESTION 29
Drag and drop the boot issues from the left onto the correct solutions on the right.
Answer:
Explanation:
NEW QUESTION 30
Which feature on MDS platforms ensures that the code that is running on the hardware platform is authentic and unmodified, while also validating the BIOS to eliminate any rootkits?
- A. UEFI Secure Boot
- B. Cisco Secure Boot
- C. Secure Unique Device Identifier
- D. BIOS Secure Boot
Answer: A
NEW QUESTION 31
A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)
- A. FCoE is already enabled on a Cisco MDS switch.
- B. VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.
- C. On the Cisco MDS, the MTU is set equal to 2112.
- D. The QoS policy must be identical to other Cisco FCoE switches in the network.
- E. On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.
Answer: D,E
NEW QUESTION 32
DRAG DROP
Drag and drop the boot issues from the left onto the correct solutions on the right.
Select and Place:
Answer:
Explanation:
Section: MDS Troubleshooting
Explanation
NEW QUESTION 33
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
- A. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual - B. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp esp manual MDS(config-if-fcsp)# mode gcm
- C. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp mode gcm MDS(config-if-fcsp)# fcsp esp manual
- D. MDS(config)# fcsp esp manual
Answer: A
NEW QUESTION 34
A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?
- A. show telemetry transport
- B. show telemetry pipeline stats
- C. show analytics system-load
- D. show telemetry control stats
Answer: B
NEW QUESTION 35
......
Updated Verified 300-625 dumps Q&As - Pass Guarantee or Full Refund: https://www.newpassleader.com/Cisco/300-625-exam-preparation-materials.html