EMC DES-3128 Exam Dumps - PDF Questions and Testing Engine
Latest DES-3128 Exam Dumps for Pass Guaranteed
NEW QUESTION # 18
A customer asked an administrator to configure Active Directory (AD) granular level backups A backup administrator discovered that the AD Domain distinguished name is CN=company,CN=local What should be entered in the Save Sets attribute for the Domain Controller client to back up the Active Directory?
- A. CN=companyCN=local
- B. AD:CN=company.CN=local
- C. APPLICATIONS/AD/CN=company,CN=local
Answer: C
NEW QUESTION # 19
A backup administrator has installed a NetWorker Server on a Windows 2019 host. The installation finished successfully. When the NMC Launcher started and the backup server's name is specified as the NMC server, the following error is observed.
Unable to connect the NMC server
The administrator determined the NMC was not installed. What is the recommended action to resolve the issue?
- A. Run the lgtoxtdcint-fversionJ.exe installation executable.
- B. Run the lgtonmc-[version].exe installation executables.
- C. Open a service request with Dell Technologies.
- D. Rerun the installation and enable the NMC option.
Answer: C
NEW QUESTION # 20
A NetWorker server has a media library attached. A backup administrator has started a workflow and noticed that the Waiting for 1 writable volume(s) to pool alert appeared. There are some unlabeled media in the library, but NetWorker doesn't label them automatically.
What is the cause of this behavior?
- A. A Recycle from other pools attribute on the pool properties is disabled.
- B. An Auto media management attribute in tape properties is disabled.
- C. An Auto media management attribute in library properties is disabled.
- D. A Recycle to other pools attribute on the pool properties is disabled.
Answer: C
Explanation:
This alert indicates that the auto media management attribute in the library properties is disabled. This feature allows NetWorker to automatically label media if it is not labeled when it is inserted into the media library.
NEW QUESTION # 21
What is the outcome of using the recover -iN command?
- A. The recovered file is renamed when a conflict occurs.
- B. A recover is simulated, and no data is recovered.
- C. The file is not recovered if a conflict occurs.
- D. The file overwrites the existing file if it is newer than the existing file.
Answer: B
Explanation:
The recover -iN command is used to simulate a recover operation. This command will show which files would be recovered if the recover command is run, but no data is actually recovered. The other options are not related to this command.
NEW QUESTION # 22
Which event category indicates that a nonfatal error has occurred?
- A. Warning
- B. Alert
- C. Notification
- D. Information
Answer: A
Explanation:
A Warning event category indicates that a nonfatal error has occurred. The other options are not related to this process.
NEW QUESTION # 23
A DB2 database is running on an IBM AIX operating system. A customer asks an administrator to configure a backup with NetWorker.
How should the administrator respond?
- A. NMM must be installed
- B. No additional module is required.
- C. NMDA must be installed
- D. AIX backup is not supported
Answer: C
Explanation:
To configure a backup of a DB2 database running on an IBM AIX operating system with NetWorker, the administrator must first install the NetWorker Module for Databases and Applications (NMDA).
NEW QUESTION # 24
A backup administrator wants to configure PSS for a client to have this configuration:
3 PSS for save set '/data1'
5 PSS for save set '/data2'
How can this be achieved?
- A. PSS:streams_per_ss=3,/data1, 5,/data2
- B. PSS:streams_per_ss=3,/data1t PSS:streams
- C. PSS:stream_ss=3,/data1; 5,/data2
- D. PSS:streams_per_ss=3,/data1: streams_per_ss=5,/data
Answer: A
Explanation:
To configure PSS for a client to have 3 PSS for save set '/data1' and 5 PSS for save set '/data2', the administrator can use the following command:
PSS:streams_per_ss=3,/data1, 5,/data2
This command sets the number of parallel save streams (PSS) for each save set. The option "streams_per_ss" is used to specify the number of parallel save streams for each save set, and the path of the save set is specified after a comma. In this case, 3 PSS are set for the save set '/data1' and 5 PSS are set for the save set '/data2'.
NEW QUESTION # 25
What port is required tor NMC access?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 26
An administrator is creating an action resource in NetWorker. What must exist before this action can be completed?
- A. a client
- B. a workflow
- C. a protection group
- D. a notification
Answer: C
NEW QUESTION # 27
An administrator is performing a directed recover to a Microsoft Windows cluster environment.
What is the role of the client that initiated the recovery?
- A. Source client
- B. Administering client
- C. NMC client
- D. Destination client
Answer: A
Explanation:
The client that initiated the directed recover is known as the source client. This client is responsible for sending the data to the destination client. The destination client is the one that will receive the data from the source client, and the administering client is the one that initiates the recover process. The NMC client is used for monitoring the recover process.
NEW QUESTION # 28
An administrator already added a client "CLientA" This client has recently been assigned a second DNS named "ClientAB" When the backup ran, the following error is observed
"The client ClientAB is not in backup servers' clients list."
Use the simulator to resolve this issue
When you have finished, continue to the next question
Answer:
Explanation:
The steps to resolve the issue of the client "ClientAB" not being in the backup server's clients list are as follows:
Verify the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Verify that the client "ClientA" is present in the list of clients.
Verify that the client "ClientAB" is not present in the list of clients.
Update the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the ClientA.
In the Client Name field, update the name to "ClientAB"
In the Client Address field, enter the IP address or hostname of the client.
Click on the OK button to save the changes.
Re-schedule the backup
Go to the Clients tab.
Click on the ClientAB.
Go to the Schedules tab.
Remove the current schedule and create a new schedule for the client.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you need to backup.
Click on the OK button to schedule the backup.
Monitor the backup process
Monitor the backup process to ensure that it is running successfully.
Check the logs for any errors.
NEW QUESTION # 29
A customer has installed a new PowerProcted DO series appliance named DD0. The DD Boost user name is ddboost and the password is abc123. A single DD Boost device named DD01.SU01 labeled to DO.VMware_Pool is needed Use the simulator to create the desired configuration When you have finished, continue to the next question.
Answer:
Explanation:
To create the desired configuration, you will need to use the Data Domain CLI (Command Line Interface) to access the DD Boost device and create the new appliance. Here are the steps:
Log in to the Data Domain CLI by entering the following command:
ssh ddboost@DD0
Enter the password "abc123" when prompted.
Once logged in, create a new DD Boost device named DD01.SU01 by entering the following command:
ddboost device create --name DD01.SU01 --type vmware --pool DO.VMware_Pool Verify that the new device has been created by running the following command:
ddboost device show --name DD01.SU01
Configure the DD Boost device to connect to the PowerProcted DO series appliance by running the following command:
ddboost device set --name DD01.SU01 --dd-host DD0
Verify the configuration by running the following command:
ddboost device show --name DD01.SU01
NEW QUESTION # 30
Which event category indicates that a nonfatal error has occurred?
- A. Warning
- B. Alert
- C. Notification
- D. Information
Answer: A
NEW QUESTION # 31
A customer checks the rap log on a NetWorker server to audit recent resource changes, but the file is empty.
What is the cause of the issue?
- A. Permission issues for the log are set.
- B. Permission issues for the log are not set.
- C. The Monitor RAP attribute on a NetWorker Server is disabled.
- D. The Monitor RAP attribute on a NetWorker Client is disabled.
Answer: C
NEW QUESTION # 32
When deploying a new CloudBoost appliance, which command must be run to enable remote client mounts?
- A. diagnostics
- B. passwd
- C. nsrsnmd
- D. remote-mount-password
Answer: D
Explanation:
When deploying a new CloudBoost appliance, the remote-mount-password command must be run to enable remote client mounts.
NEW QUESTION # 33
A NetWorker workflow is configured as a probe-based backup
What actions must be included in the workflow?
- A. probe and backup actions
- B. check connectivity and probe actions
- C. internal and metadata validation
- D. clone and probe and action only
Answer: B
NEW QUESTION # 34
What is a feature of the CloudBoost appliance?
- A. replaces the PowerProtect DD series appliance
- B. enables the transfer of backups to cloud storage
- C. enables the transfer of backups to Dell EMC Cloud Tier
- D. replaces the PowerProtect DDVE appliance
Answer: B
Explanation:
One of the features of the CloudBoost appliance is that it enables the transfer of backups to cloud storage. It does not replace the PowerProtect DD series or DDVE appliance.
NEW QUESTION # 35
Which technology is used for backup and recovery with NMM?
- A. Parallel Save Streams
- B. NDMP
- C. Changed Block Tracking
- D. Virtual Device Interface
Answer: D
NEW QUESTION # 36
Which monitoring tool is used to view current device operations, active sessions, messages concerning recent activity, and any pending messages?
- A. NetWorker Character-Based Interface
- B. nsradmin
- C. Networker WebUser Interface
- D. nsrwatch
Answer: C
NEW QUESTION # 37
In a NetWorker environment, a daily scheduled backup was started. However, the volume did not mount, and the backup failed.
What is the reason for the failure?
- A. Volumes labeled in the required pool are appendable.
- B. Tape volumes attached to the NetWorker server are recyclable.
- C. Protection group is not selected on the pool.
- D. There are no appendable volumes that match the pool.
Answer: D
Explanation:
In a NetWorker environment, the daily scheduled backup will fail if there are no appendable volumes that match the pool. This can happen if all the volumes in the pool have already been used up, and there are no new volumes to append the data to.
NEW QUESTION # 38
Which privilege must be assigned to a user group to allow its members lo create NetWorker clients?
- A. Remote Access All Clients
- B. Monitor NetWorker
- C. Operate NetWorker
- D. Configure NetWorker
Answer: C
NEW QUESTION # 39
......
Reliable Dell EMC DES-3128 Dumps PDF Dec 24, 2023 Recently Updated Questions: https://www.newpassleader.com/EMC/DES-3128-exam-preparation-materials.html
Pass Your EMC DES-3128 Exam with Correct 62 Questions and Answers: https://drive.google.com/open?id=1WI45YKcDZ2c5DktuVTsSM7b7R9WuvlzN